ss.slp.ls1

iTrader: (36)

Where can I get a set of LSx heads milled? I know it's not a complicated job, but I still want a reputable shop to do it. I have heard good things about QMP in LA.

00SSLS1

iTrader: (7)

West Coast Cylinder Heads in Reseda

geovett

iTrader: (53)

Primos cylinder head
416 s. Bon View ave
Ontario...909-986-6433
complete valve job, $140....

ss.slp.ls1

iTrader: (36)

I don't think they need a valve job (very low miles); just pressure tested, and slightly milled.

383lt1impala

iTrader: (33)

Maybe speedomotive in west covina u can google them. They do all kinds of stuff.

Wicked_muscle

iTrader: (34)

Do it yourself that's what I did with the set that's on my car. Very easy.

ss.slp.ls1

iTrader: (36)

I'm going to get them pressure tested as well...maybe a valve job, so I'll get them milled at the same time.

MrElectric03

iTrader: (71)

I had CMS take care of mine, not sure if they use WCCH or not but who ever did it did a good job.

MJs1FastSS

iTrader: (149)

+2 heard a lot of good things from them

ericg69ss

I had my LS6 heads that were on my 427 C5R motor checked out by West Coast Cylinder Heads. Richard is a great guy and will take care of you. I was pleasantly surprised when I got my bill. He did all the things you mentioned aboved and welded 2 intake runners that had developed a few cracks and set them back up for a very reasonable price. Not too mention he also flowed them with and without my manifold. I was very happy working with him. Very honesty and reputable.

nevrlift13

iTrader: (7)

we can do it jason

KILLER-LS1

iTrader: (18)

speedomotive is doing my block (deck mill, bore/hone, hone mains and cam bearings)
and wcch is doing my heads (full CNC, install seats valves guides, port match intake manifold).

talk to george at speedomotive or richard at wcch.

george and richard are both great guys and do awesome work. I believe CMS uses wcch?

so i guess whoever is closest to you!

ZexGX

iTrader: (28)

QMP built the Gen1 SBC 383 stroker in my uncles Nova. Very well built, and a friend of mine is good friends with some of the guys at QMP.

WCCH is a good choice too.

Ryne @ CMS

iTrader: (10)

i have a guy that real good, also richard is really good as well, he does all my cnc work..... as far as valve jobs the only guy that i would have touch that would be richard, an improper valve job can **** flow up

vrtch ss

I recommend QMP they milled my AFR'S.

Qwiknotch

QMP in Chatworth, Mike and Brad know their ****

There is also A.R.E Performance in Simi Valley.. he has all the machines in shop. he is building my new engine. Going on the dyno Monday