When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
All LT1 blocks have a big "327" cast into both sides of the block. Dead giveaway.
well i just found a block with a big 327 on it i measured the bore and it was 3.75" not 4.00" making it a 305 with the same casting number....now im baffled
well i just found a block with a big 327 on it i measured the bore and it was 3.75" not 4.00" making it a 305 with the same casting number....now im baffled
Was the 327 on the both sides of the block, like the face where the motor mounts bolt to? If so, I would check the mesuring device or the user.