greatskiiiier

iTrader: (10)

how many miles will et streets last on a summer only daily driver, car is my DD from May-August and sees the track 2-3 times a summer?

also will this be ok to run with my aluminum spacer at the track? i shouldnt break anything on a hard launch right?

BIG_T

iTrader: (1)

radial or bias ply?

nauticalstar2012

iTrader: (-1)

I'll guess 6,000-8,000 miles of semi spirited driving

346ci

I've heard 6-10k depending on the driver, I have 1k miles on mine (et drag radials) with about 8 passes on them and they still look new. I keep mine on a spare set of rims for the track and occasional street use.

greatskiiiier

iTrader: (10)

perfect, i drive it less than 3K miles a year lately so 2-3 "years" is good for me! lol... i meant the radials as well


what about having these with the wheel spacers i got, i shouldnt break anything on a hard launch right? i have moser studs, doing to the aluminum wheel spacer, and grade 8 studs going to my wheel

RsSean

iTrader: (27)

I have them on my street wheels and drive on them all the time. I will get 10k with a a few track passes.

LS1RedZ

iTrader: (19)

As long as you dont do a big clutch dump you should be fine. Stay away from wheel hop lol

Slow5.0.

iTrader: (5)

Anyone have any feed back of the bias ply on the street? for a weekend car? Will they hook better when cold then a m/t drag radial? Its hard to do a burnout on short notice!

chrysler kid

iTrader: (14)

everything i have seen from the bias ply et street is that it doesnt last as long, and hooks exactly the same as the radial

223HAWK

iTrader: (11)

Ill disagree here..they hook a hell of a lot better than the radials. I have 28x13.5s on my car and Iv pulled the tires at the track, on the street..with the Radials the car wont 60ft at all..track or street..Radials are more fun to play around on..but I lose races on radials!!

I drive my car a lot with the bias plys...just like any racing tire..dont be dumb and watch out for rain. I dont pay attention to mileage or life..its a racing tire..thats what they were made for..You want life..get Nittos..You want Traction..MTs..

Slow5.0.

iTrader: (5)

Thing is with a solid burnout I can get enough traction too hook from 50ish...as long as its on concrete but once i cruise and the tires cool.. nothing spins to 100. This is a 17 m/t radial

I'm thinking with a 15 inch 10.5 et street i can hook while just cruising and no burnout because of the larger side wall and design of a bias ply? I could be wrong but, it's worth a try. Can't have fun with a car that spins all the time.