Tranzella

Basically what the title says....is anybody running custom made 18" TT IIs? If so, can you post some pics and the wheel specs? Thanks!!!

silverWS.6

iTrader: (1)

Lucky I got nothing better to do on this snowy day, this is the only one I've seen with 18's. Its the red LT1 a couple post down.

https://ls1tech.com/forums/wheels-ti...2s-here-4.html

96ss1664

Im running 18 x 10, with 275/35 on front and 295/35 on rear. I really need a little bit bigger tire on the front.

silverWS.6

iTrader: (1)

And that would be the exact car I was referring to looks real good

Tranzella

Thanks guys! 96SS, what offset/backspace are those? Did you have any issues with fitment? I was thinking about 18x9.5" with 285s, but if 10" wheels fit I may change my mind. Oh...and how much are you lowered?

venom ws7

iTrader: (13)

96SS Where did you buy those? Looks awesome.

a98ws6

iTrader: (48)

Search MOTRUBL on here. Should have a link to his Cardomain for pics.

96ss1664

No fitment issues, I'm running Eibach Pro Kit Springs and Bilstein shocks with adjustable Panhard and LCA relocation brackets. So its about a 1.5"-1.75" lower than stock. I don't have the offset/backspace but if you really need it I can take a wheel off and measure it. Just let me know.

They were custom order through Tomz Wheels back in 06, and thank you sir!

Blackbirdws6

iTrader: (7)

I run 18s as well. Fronts have the max offset and I would have to look up the backspace on the rears.

Tranzella

Hey Blackbird...are those 18"x10" a well? What size tires? Sorry for all the questions guys, but if I'm gonna order custom wheels I want to get it right! Thanks!!

LilJayV10

iTrader: (39)

I love LT1 SS cars! That's a very nice car man.

LilJayV10

iTrader: (39)

Wow that's sweet! More LT1 love in here.

Blackbirdws6

iTrader: (7)

Tranzella - Fronts are 18x8 and rears are 18x10.

Thanks LilyJayV10

96ss1664

Thank you sir!! My car was ordered and delivered to Kenny Kent in Evansville.

Tranzella

Man...somebody is selling a set of these in the classifieds. Specs are:

18 X 9 1/2, 6.75 in. Backspace/+38mm offset. I feel like this offset would be too low for an fbody. Inner clearance would increase by .22", and the wheels would stick about .71" more than stock. Not sure how that would look?? Am I wrong here?

Blackbirdws6

iTrader: (7)

I'm going purely off of memory so I may be wrong but I believe my rears are +50. They could prob go in a touch but I have no inner clearance issues with anything. Having the wheels come out a bit over stock would be fine in my book since the stockers are tucked in pretty well (too much IMO).

Blackbirdws6

iTrader: (7)

I'm actually thinking of selling the wheels and tires. They are still in great shape with a lot of life left in the tires.