TTM's Anthracite or Black?
#1
TECH Apprentice
Thread Starter
Join Date: Dec 2011
Location: Loganville, Georgia
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
TTM's Anthracite or Black?
Thinking about getting the ttms but i gotta figure out which finish would look best, The car is a silver ws6 with black overlays on the door emblems and the license plate cover. The car has the ceta mod done in semi gloss black and has black blackbird stripes. Now do you guys think that the grey or the black would suit the car better? I really like the big lip on these wheels and think it will come down to betweent this wheel. The other wheel i was looking at was the c5z wheels in chrome.
#4
been looking for new wheels for my 95 z28 vert. American Racing razors in gunmetal in 19 or 20 in would be killer on my z28 against the polo green and gray fabric interior, but alas they have been disc. Its a matter of taste of course, but it would be a classic as well as a unique combo. Would never consider upgrading wheels to anything smaller then 19 or 20 in. Any ideas where I might find AR razors still in some suppliers stock? thanks
#5
TECH Enthusiast
iTrader: (1)
Thank you
been looking for new wheels for my 95 z28 vert. American Racing razors in gunmetal in 19 or 20 in would be killer on my z28 against the polo green and gray fabric interior, but alas they have been disc. Its a matter of taste of course, but it would be a classic as well as a unique combo. Would never consider upgrading wheels to anything smaller then 19 or 20 in. Any ideas where I might find AR razors still in some suppliers stock? thanks
Trending Topics
#10
On The Tree
iTrader: (2)
Join Date: Oct 2011
Location: Abilene, TX
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
TTM-black or anthracite?
So my fiancé finally gave me the go on some TTM's for my T/A (God bless her)
Problem I'm having is an internal debate on whether or not black w/machined lip or anthracite. I Really like both but am having one hell of a time making up my mind so I turn to the more experienced crew...
Going on a black T/A. Looking at 17x9 and 17x10.5 with 275/40/17 and 315/35/17's in the rear... Any advice will be appreciated even though I know this has been beaten to death!
Problem I'm having is an internal debate on whether or not black w/machined lip or anthracite. I Really like both but am having one hell of a time making up my mind so I turn to the more experienced crew...
Going on a black T/A. Looking at 17x9 and 17x10.5 with 275/40/17 and 315/35/17's in the rear... Any advice will be appreciated even though I know this has been beaten to death!
#13
I'd go Anthracite. IMO the only time black wheels look good are when they're not moving. Otherwise you lose the detail of the wheels during any movement, and to me it's just a loss. Especially on a black car. Anthracite, or painted silver look better to me especially on black cars because it shows off the wheels style much more so even when it's moving.