Well i hope im not in over my head but i have stock weight on my car full bolts ons,car goes to MTI for Stage 2 E port and polished heads, comp cams 231/237 .598/.608 on a 112 with a underdrive pulley, and 3.73 gears with a 3200 stall(all dyno tuned). Im also adding nittos for the strip, are the 10's possible??

 

No, mid to low 11's. Just not enough power with ur stock weight.

 

You might want to try a better tire than Nitto. M/T drag radials, and BFG drag radials are superior than Nittos. If you are not running nitrous I would recomend steeper gears and if you are going to try and ru tens, consider a stronger rear end. Stock rear ends arn't to strong. One real good hook and boom. A higher stall would be a good option. Getting out of the hole makes a big difference. I hope this helps.

 

What head gasket and what size head chambers?
If the quench is tight and compression around 11.5 you will be close but you might need to lose a little weight.
Bob