I wanna hit 130mph in the 1/4
11-05-2007, 07:36 AM
#21
CARTEK Racing
iTrader: (13)
Join Date: Nov 2001
Location: East Brunswick, NJ
Posts: 2,182
Likes: 0
Received 0 Likes
on
0 Posts
131.48mph here.
More then 10 passes at 131mph and an additional 10 or so at over 130.
Stock bottom end H/C 6speed car at 3300lbs race weight.
Its very posible. 2 other CARTEK H/C Corvettes have broken the 130mph mark with a stock bottm end.
More then 10 passes at 131mph and an additional 10 or so at over 130.
Stock bottom end H/C 6speed car at 3300lbs race weight.
Its very posible. 2 other CARTEK H/C Corvettes have broken the 130mph mark with a stock bottm end.
11-27-2007, 09:14 PM
#24
TECH Fanatic
Join Date: Oct 2007
Location: Ventura County, California
Posts: 1,129
Likes: 0
Received 0 Likes
on
0 Posts
Why are you set on 130 mph? Why not a few more mph, then you'll be in the 9's =)
Although a friend of mine ran 10.0@ 129, but his **** hooked dead up.
Although a friend of mine ran 10.0@ 129, but his **** hooked dead up.
11-28-2007, 03:53 PM
#25
11 Second Club
iTrader: (17)
Join Date: Mar 2005
Location: Maryland
Posts: 4,796
Likes: 0
Received 0 Likes
on
0 Posts
the max mph for 3.90s and 26" with a 6600 revlimiter is 130
i also rather have a few more mph then a lower ET
i want to do a cam that should get me 400rwhp then add a 150 shot and that should make 550 rwhp give or take 15 hp
if i trap 127 with the cam and 150 i would be happy.
is it that easy? well not easy but is that what it would take?
i also rather have a few more mph then a lower ET
i want to do a cam that should get me 400rwhp then add a 150 shot and that should make 550 rwhp give or take 15 hp
if i trap 127 with the cam and 150 i would be happy.
is it that easy? well not easy but is that what it would take?
12-05-2007, 11:03 PM
#30
On The Tree
iTrader: (15)
Join Date: Aug 2007
Location: Houston, Texas
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
will it even be possible to hit 10s with a 6.0, the MS4 cam, 42 lb injectors, LS6 intake, full exhaust and 150 shot with 3.42 gears and full weight on a 26 in mickey thompson
08-08-2008, 02:57 PM
#36
11 Second Club
iTrader: (19)
Join Date: May 2006
Location: Whidbey Island, Wa.
Posts: 965
Likes: 0
Received 0 Likes
on
0 Posts
Kinda interesting thread.
The guy I bought my ss from, he ran 11.15 at 123mph. Came off the line at idle, Because he still had the stock 10 bolt. Next week a new FAB 9" Will be goin in with 3.50 gears. I am hoping I can break the 10 bearer, off the trans brake.
The guy I bought my ss from, he ran 11.15 at 123mph. Came off the line at idle, Because he still had the stock 10 bolt. Next week a new FAB 9" Will be goin in with 3.50 gears. I am hoping I can break the 10 bearer, off the trans brake.
