well I have to get my cam installed... still waiting to get the time to do so... but any ways.. I have alot of people telling me that I won't be able to get into the 11's.... car is a 02 SS A4, long tube headers, off road y, no cats, SLP lid, K&N, Circle D "3c", 555R's, transgo shifkit... and still to install is my cam(specs are 230/230 .613/.591) and I also have a e-cutout still to go in and yes I will get a tune also

 

well I'd be more concerned if I didn't hit 11's with that setup!! have fun rubbing that time slip in their face!

 

well trust me I will have to do that for sure if I get in the 11's... I'd really like to think that I will get there but you never know.. well after the install of the rest of my goodies and tune... I will have to try to find a way to a 1/4

 

Do you have suspension and tires? It's possible but why the smaller converter with that cam?

 

stock suspension and yes I have drag radials(Nitto)... and I thought that 3500-3700 was a nice size stall... I know it isn't a 4000 or anything but I thought it was a good size

 

Are you lowered? If not if you remove the front sway bar you may do okay. You really need SFC's, LCA's and a torque arm though to plant it. I have the 4C which is 3600. 3C right? That should be like a 3200 stall. Post back when you go... curious how it does.

 

no not lowered... I was told that the "3C" was rated at 3500-3700.... cause I was looking for a 3600 one... but maybe I am wrong... but once I get the cam in and tune I will find my self at a 1/4 track as soon as I can... well this came from Chris from Circle D.. "I have the "3C" that is rated 3500-3700 and about a 2.2 STR."

 

He is correct. The 3C is 3500-3700. The 4C is 3600-3800. I give ranges because every setup is different. Have fun with the first 11 - you will love it!!

Chris

 

Thanks Chris for clarifying that up for me

 

well any more ideas if I can do it or not?

 

It's possible. Why not just take it and see? I thought I had 11's but come up short. We are getting better weather so I am going to try again!

 

well I would but still have to find the time to put my cam in and e-cutout on... and then the following weekend to get it tuned... but don' know when all of this is gonna happen