Hit 11's with new setup...and stock rear
03-29-2008, 11:03 AM
#1
11 Second Club
Thread Starter
iTrader: (10)
Join Date: Dec 2005
Location: Finksburg, MD
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Hit 11's with new setup...and stock rear Ran at Capitol Raceway last night. After a botched first run (16.7@66 lol), i ran 12.2 then 12.0 and the final run of the night was my 1st 11 second pass ever:
R/T : .674
60' : 1.803
330' : 5.045
1/8 : 7.740
MPH : 92.37
1000 : 10.017
1/4 : 11.940
MPH : 117.94
VIDEO:
http://videos.streetfire.net/video/L...run_155729.htm
When launching I was feathering the clutch instead of dropping it to preserve the 10 bolt. Yes i realize i need a new rearend. I'll link this in the title change thread, but will it change? I know they were having problems with that.
R/T : .674
60' : 1.803
330' : 5.045
1/8 : 7.740
MPH : 92.37
1000 : 10.017
1/4 : 11.940
MPH : 117.94
VIDEO:
http://videos.streetfire.net/video/L...run_155729.htm
When launching I was feathering the clutch instead of dropping it to preserve the 10 bolt. Yes i realize i need a new rearend. I'll link this in the title change thread, but will it change? I know they were having problems with that.
Last edited by tacklebox; 03-30-2008 at 06:56 PM. Reason: added vid link
03-29-2008, 05:26 PM
#4
11 Second Club
Thread Starter
iTrader: (10)
Join Date: Dec 2005
Location: Finksburg, MD
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Thanks fellas. bad6as, was that you last year talking about going to jimmy cone in mt. airy? Also yes i agree there is still a couple tenths left in it, but i'll need that 9" if i want any more than that!!!
Anybody know when they're gonna be able to change titles again?
Anybody know when they're gonna be able to change titles again?
03-29-2008, 05:46 PM
#6
11 Second Club
Thread Starter
iTrader: (10)
Join Date: Dec 2005
Location: Finksburg, MD
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Here is a link to the video. Even though you cant see the numbers:
http://videos.streetfire.net/video/L...run_155729.htm
http://videos.streetfire.net/video/L...run_155729.htm
Trending Topics
07-11-2008, 10:55 AM
#16
11 Second Club
Thread Starter
iTrader: (10)
Join Date: Dec 2005
Location: Finksburg, MD
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
With the LS6 intake/ported tb for these runs i made 406/373 on a "very stingy" mustang dyno. Now with my 90/90 setup i make slightly more hp and slightly less tq on the same "stingy" dyno.
07-15-2008, 12:46 AM
#20
11 Second Club
Thread Starter
iTrader: (10)
Join Date: Dec 2005
Location: Finksburg, MD
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
