Striker

iTrader: (1)

I mite install it, we will see. I kinda like the idea, but I would like to hear how effective it really is.

big dave

12.15@116 on toyo proxis. Bolt-on full weight SS. Not that difficult to do given the right conditions and a couple mods.

S8ER95Z

iTrader: (3)

Since it's been done with a stock car I would say Good air + great driver is enough (at atco) ...

in the rest of the country a lid, catback should be enough to get a very high 12. Adding long tubes would practically guarantee you a 12 second slip.

boola1341

iTrader: (1)

I ran 12.89 on my bf kdws street tire consistently.

TurboAv

iTrader: (6)

12.21 Sumitomo HTR Z with a 1.78 60ft.

Derek_02z

I ran a 12.73 at 117.5 and a 12.81 at 116.5 spinning halfway through first on kumho 245/50/R16s on concret with just a SLP lid and a bellow and the exhaust dropped at the Y but i also have an A4 with 3.23's out back...

BriancWS6

iTrader: (18)

In 05 I went 12.9s with EVERYTHING stock except for an SLP lid. On yokahama street tires. 2.050 60 ft.

allforspeed

iTrader: (1)

FTRA is worth it, its a proven .10 in the quarter mile and most people report getting better gas mileage too. its hard to say but i think i felt a slightly noticable increase in power.

Striker

iTrader: (1)

I think that im just goin to do the free ram air mod and make my own shield to direct more air to the slp lid and thats it.

RaggedRides

iTrader: (8)

12.94 at 107 with a 1.994 60ft on stock 16s and 245mm Kumhos. I blame good track prep because it didn't spin a bit that day.

foreverzero

iTrader: (5)

12.73 on sumitimos, goin around the waterbox and no burnout. Oh and a 1.9 60!

WS6R6

iTrader: (1)

12.7@110 last year before the cam on sumitomo's with a 1.9x 60' going around the water box also!

jetlag

iTrader: (32)

12.7 @ 109

2.73 gears
Pacesetter LTs
Slp lid
stock tune

Punisher GTO

12.2 @110mph a4 ls1 / on 255/40/17 bfg kdws [stock stall and gears] 1.7X 60 foot. it just takes practice

Striker

iTrader: (1)

Does anyone have any magazine articles of late model F-Bodies breaking 12s when they were brand new? Correct me if im wrong, but muscle mustangs did a test on a 02 SS and broke 12s.

therealcreeper

iTrader: (37)

idk if i'm allowed to post this link but:

http://www.stangbangers.com/01_Bullitt_Article2.htm

LS1Adam84

iTrader: (21)

I have yet to go 1/4 mile yet as I live right near a 1/8 mile track.

A4
Lid
3:42 Gears
Cat back
Built trans from auto parts firm (built by Johnny at xtreme trans)
and a custom 3k stall converter (built by HL performance converters and designed by 12secss and Hilton Lara)

I have for rims the heavier 5 spoke firebird rims (heavier than stock snowflakes) wrapped with some really old and shitty yokohama avs

best so far 8.19 at 85.5 mph with a 1.8x 60' thats roughly a 12.8 in the 1/4

ebaker

iTrader: (4)

i ran a 12.92 last night on kumho ecstas with a lid/headers/off road ypipe and no catback so its def possible.

Bird_Of_Prey

iTrader: (1)

I went 12.42 with a 1.800 60' in my 02 WS6 on 285/35/R18 BFG KDW's on heavy aftermarket C6 Z06 wheels. Shitty Flowtech headers, stock catback with a cut out, an unknown cam (bought the car with the cam installed), and an SLP lid that doesn't fit.

69LT1Bird

iTrader: (1)

12.29@115.78
2.01 60 ft
8.06@96 1/8 mile

BF Goodrich radial TA's at 32 psi
3700lb race weight
Didn't go WOT for the first 3.5 seconds so I could control the spin.