12 Second Club In the 12s yet? Come inside!

Bolt on 02 sweeked in 12s

Thread Tools
 
Search this Thread
 
Old 03-27-2012, 10:12 PM
  #1  
11 Second Club
Thread Starter
iTrader: (3)
 
1Bad97WS-6's Avatar
 
Join Date: Jul 2006
Location: Fredericksburg,Va
Posts: 819
Likes: 0
Received 0 Likes on 0 Posts
Default Bolt on 02 sweeked in 12s

I have a 02 Z28 with 56K miles and with stock tune and bad knock sensors with minor bolt on's that I made it in the 12s. Here is what it took me to get in the 12.I have an A4 with a stock stall and 273 gears.I was running on stock wheels with street radials. I'm trying to get in the 12 second club.

MODS....
1. SLP Lid
2.Smooth bellow
3.K&N
4.Free Mods
5.Hooker ceramic coded Long tubes with 3" Hooker ORY
6.SLP LM1 Cat back.
7.Sub frame connectors
8.BMR Lower Control Arm.
9.8.5mm MSD wires
10.NGK TR55 plugs.

I have weight reduction also. That's about 181 pounds..
1.Spare tire and jack-36 pounds
2.A/C delete-33 pounds
3.Front Sway bar/brackets-15 pounds
4.Back seat/rear seat belts/bolts-35 pounds
5.Air pump/fittings-8 pounds
6.Fog lights with brackets-3 pounds
7.T-top holders-2 pounds
8.Windshield wiper fluid-9 pounds
9. No Cats-15 pounds
10. Long tube headers-25 pounds

Here is what the car ran

8.45@85.26 1/8
12.97@107.88 1/4

Last edited by 1Bad97WS-6; 03-27-2012 at 11:15 PM.
Old 03-29-2012, 07:38 AM
  #2  
TECH Addict
iTrader: (21)
 
blk/slvr02ss's Avatar
 
Join Date: Dec 2006
Location: Port Saint Lucie,Florida
Posts: 2,767
Likes: 0
Received 1 Like on 1 Post
Default

What is your 60ft ? W/ your MPH you should be running faster !!! I had a Different 02 Camaro SS A4 w/ a P&P TB & Hypertech hand tuner and ran 12.89 @ 106 w/ no weight reduction !!!
Old 03-29-2012, 08:48 AM
  #3  
TECH Enthusiast
 
6SSPEED's Avatar
 
Join Date: Aug 2004
Location: Muscle Shoals, AL
Posts: 689
Likes: 0
Received 0 Likes on 0 Posts

Default

^^ True story. You should be faster for what all you have done. You may have other issues besides the knock sensors.
Old 03-29-2012, 11:18 AM
  #4  
11 Second Club
Thread Starter
iTrader: (3)
 
1Bad97WS-6's Avatar
 
Join Date: Jul 2006
Location: Fredericksburg,Va
Posts: 819
Likes: 0
Received 0 Likes on 0 Posts
Default

My 60ft was 2.03-2.09 My car is throwing like 6 codes right now since I haven't had it tuned yet. I'm waiting till I add my SS4000 and 373 gears. Before LT's/ORY. My car only have 56K miles so it shouldn't be anything motor wise. It don't knock or run hot. I went 8.62@84.06 and 13.23@106.11 After LT's/ORY and I ran 8.45@85.26 and 12.97@107.88. I thought I picked up pretty well with just LT's/ORY and about 111 pounds taking out since last time I ran..

Im still running on stock wheels and 245 tires.When I get to the track I make my 1st 2 passes soon as I get there with no cool off time. Tracks around are packed most of the time so you dont get that many runs in..

See you had a ss with the better 323 gear and you had a hand held tuner I have nothing and I have the sucky 273 gear. I bet after I get my knock sensors/4000 stall/373s/tuned/DR's I will run somewhere between a 11.6s-11.8s

Last edited by 1Bad97WS-6; 03-29-2012 at 11:31 AM.
Old 03-29-2012, 11:43 AM
  #5  
11 Second Club
Thread Starter
iTrader: (3)
 
1Bad97WS-6's Avatar
 
Join Date: Jul 2006
Location: Fredericksburg,Va
Posts: 819
Likes: 0
Received 0 Likes on 0 Posts
Default

oh another thing I just thought of If I have the mph for a faster time doesn't that show I have the HP. I think its all in my 60fts. 2.0s isn't that good of a 60ft.
Old 03-29-2012, 09:58 PM
  #6  
TECH Junkie
iTrader: (4)
 
s346k's Avatar
 
Join Date: May 2005
Location: johnson co.
Posts: 3,433
Likes: 0
Received 1 Like on 1 Post

Default

dude my car picked up 8 mph going from stock exhaust to long tubes and true duals, stock tune. granted, the car was a slug to start with, it still responded very well.

congrats on making 12s, but it does seem a little sluggish.
Old 03-29-2012, 10:38 PM
  #7  
11 Second Club
Thread Starter
iTrader: (3)
 
1Bad97WS-6's Avatar
 
Join Date: Jul 2006
Location: Fredericksburg,Va
Posts: 819
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by s346k
dude my car picked up 8 mph going from stock exhaust to long tubes and true duals, stock tune. granted, the car was a slug to start with, it still responded very well.

congrats on making 12s, but it does seem a little sluggish.
I had SLP 3" Y and LM1 on it before I did LT's/ORY. I think Its my Knock sensors because I have been told I could pickup .2 and a few mph with just them. The track I went to is a pos track..It goes up hill a little and it don't hook as well..
Old 03-30-2012, 06:31 AM
  #8  
TECH Enthusiast
iTrader: (16)
 
BAMALS1's Avatar
 
Join Date: Dec 2004
Location: Rocket City
Posts: 734
Likes: 0
Received 0 Likes on 0 Posts

Default

Congrat's...put a good converter in it drag radials and get the issues fixed and you got a beast!
Old 03-30-2012, 09:16 AM
  #9  
11 Second Club
Thread Starter
iTrader: (3)
 
1Bad97WS-6's Avatar
 
Join Date: Jul 2006
Location: Fredericksburg,Va
Posts: 819
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by BAMALS1
Congrat's...put a good converter in it drag radials and get the issues fixed and you got a beast!
thanks, Ya I got the Yank SS4000 Stall and 373 gear and I'm gonna get a set of skinny/wide's with a set M/T Drag Radials. I'd like to get onthe Top 50 SI list on here. I'm gonna take off my front and rear bumper supports with the Skinny and wide's will be around another 123 pounds off of what my car weights now..

Last edited by 1Bad97WS-6; 03-30-2012 at 09:48 AM.
Old 03-31-2012, 12:38 AM
  #10  
11 Second Club
Thread Starter
iTrader: (3)
 
1Bad97WS-6's Avatar
 
Join Date: Jul 2006
Location: Fredericksburg,Va
Posts: 819
Likes: 0
Received 0 Likes on 0 Posts
Default

I went a new PB tonight 1.960 8.39@86.51 If this was a 1/4 mile track from my pb 1/4 this would of been an 12.87@ 108.56
Old 03-31-2012, 05:08 PM
  #11  
TECH Junkie
iTrader: (4)
 
s346k's Avatar
 
Join Date: May 2005
Location: johnson co.
Posts: 3,433
Likes: 0
Received 1 Like on 1 Post

Default

nice times for a stock stall 273 car, mine was terribly slow.

that's pretty close to the best pass i've made in this 99 m6 car. i went 8.29 @ 87.99 with a whisper lid and weld in fm80 series, otherwise stock and untouched.
Old 04-01-2012, 01:33 AM
  #12  
11 Second Club
Thread Starter
iTrader: (3)
 
1Bad97WS-6's Avatar
 
Join Date: Jul 2006
Location: Fredericksburg,Va
Posts: 819
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by s346k
nice times for a stock stall 273 car, mine was terribly slow.

that's pretty close to the best pass i've made in this 99 m6 car. i went 8.29 @ 87.99 with a whisper lid and weld in fm80 series, otherwise stock and untouched.
Thanks man I'm hoping for Mid to7.7s with my ss4000/373/tuned/knock sensors/DR's..
Old 04-04-2012, 12:17 AM
  #13  
Teching In
 
Hot2000ss's Avatar
 
Join Date: Jan 2012
Location: corona
Posts: 37
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by blk/slvr02ss
What is your 60ft ? W/ your MPH you should be running faster !!! I had a Different 02 Camaro SS A4 w/ a P&P TB & Hypertech hand tuner and ran 12.89 @ 106 w/ no weight reduction !!!
how did you like that hypertech tuner? are they worth the money?
Old 06-18-2012, 09:36 PM
  #14  
11 Second Club
Thread Starter
iTrader: (3)
 
1Bad97WS-6's Avatar
 
Join Date: Jul 2006
Location: Fredericksburg,Va
Posts: 819
Likes: 0
Received 0 Likes on 0 Posts
Default

I replaced my knock sensors but I haven't took it to the track. But I'm wait till I do my gears or stall or both to run it again.
Old 07-26-2012, 03:48 PM
  #15  
11 Second Club
Thread Starter
iTrader: (3)
 
1Bad97WS-6's Avatar
 
Join Date: Jul 2006
Location: Fredericksburg,Va
Posts: 819
Likes: 0
Received 0 Likes on 0 Posts
Default

I'm about to install my Yank SS4000 Stall and my Transmission cooler next weekend. Will running it with the 273 gear hurt anything till I add the 373 gear. Thanks Jimmy.
Old 07-26-2012, 07:55 PM
  #16  
On The Tree
 
Jarred Hodges's Avatar
 
Join Date: Aug 2011
Location: dora al
Posts: 157
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 1Bad97WS-6
I'm about to install my Yank SS4000 Stall and my Transmission cooler next weekend. Will running it with the 273 gear hurt anything till I add the 373 gear. Thanks Jimmy.
I am looking foward to seeing what it will do
Old 07-26-2012, 08:24 PM
  #17  
11 Second Club
Thread Starter
iTrader: (3)
 
1Bad97WS-6's Avatar
 
Join Date: Jul 2006
Location: Fredericksburg,Va
Posts: 819
Likes: 0
Received 0 Likes on 0 Posts
Default

I will let all ya'll know what it does.
Old 08-12-2012, 07:14 AM
  #18  
11 Second Club
Thread Starter
iTrader: (3)
 
1Bad97WS-6's Avatar
 
Join Date: Jul 2006
Location: Fredericksburg,Va
Posts: 819
Likes: 0
Received 0 Likes on 0 Posts
Default

I added my SS4000 Stall yesterday let me tell you its a world of a difference. I have to change my 273s to 373s asap,
Old 08-12-2012, 09:42 PM
  #19  
11 Second Club
Thread Starter
iTrader: (3)
 
1Bad97WS-6's Avatar
 
Join Date: Jul 2006
Location: Fredericksburg,Va
Posts: 819
Likes: 0
Received 0 Likes on 0 Posts
Default

I almost got the 150 brake in period. I get a po757 and some times it don't shift in to 2nd gear. Unless I let of the gas. I haven't went wot yet. I know when I eased on the throttle to and 1/2 throttle and it pulls great.
Old 08-20-2012, 01:51 PM
  #20  
12 Second Club
iTrader: (3)
 
exodus_gs1's Avatar
 
Join Date: Mar 2010
Location: Guthrie,Oklahoma
Posts: 654
Likes: 0
Received 0 Likes on 0 Posts
Default

Hell congrats on getting into the 12's I have kinda the same setup. I hope to get the track before to long and get some numbers. Thats a big tc I was always told you needed 4.10's going that big


Quick Reply: Bolt on 02 sweeked in 12s



All times are GMT -5. The time now is 04:22 PM.