mid 12s in a mach 1
12-13-2006, 12:58 AM
#1
Teching In
Thread Starter
Join Date: Nov 2006
Location: Concord, N.C.
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
mid 12s in a mach 1 I have a mach 1 with full exhaust, ud pullies, cai, 4.10s, 31 spline axles and carrier (so it does not break) and a tune. I recently ran at rockingham dragway and ran a 12.5 @ 110 with an 1/8 of 8.0 @ 91. My 60' was 1.8 on drag radials. I know that i can go low 12s if i can get out of the hole better.
I ran against a buddies 02 zo6 with a veraram kit. he ran a 12.2 @ 117, i beat him in the 1/8 by 2 ths. Gotta love the ls6 topend!
I ran against a buddies 02 zo6 with a veraram kit. he ran a 12.2 @ 117, i beat him in the 1/8 by 2 ths. Gotta love the ls6 topend!
12-13-2006, 05:26 PM
#5
10 Second Club
iTrader: (4)
Join Date: Aug 2004
Location: Southern Maryland
Posts: 3,576
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mach1Mustang
I have a mach 1 with full exhaust, ud pullies, cai, 4.10s, 31 spline axles and carrier (so it does not break) and a tune. I recently ran at rockingham dragway and ran a 12.5 @ 110 with an 1/8 of 8.0 @ 91. My 60' was 1.8 on drag radials. I know that i can go low 12s if i can get out of the hole better.
I ran against a buddies 02 zo6 with a veraram kit. he ran a 12.2 @ 117, i beat him in the 1/8 by 2 ths. Gotta love the ls6 topend!
I ran against a buddies 02 zo6 with a veraram kit. he ran a 12.2 @ 117, i beat him in the 1/8 by 2 ths. Gotta love the ls6 topend!
But mid 12's with 110mph traps is very respectable.
12-13-2006, 11:49 PM
#6
Teching In
Thread Starter
Join Date: Nov 2006
Location: Concord, N.C.
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 00Vette
That is very respectable!! I run 12.0 at 118-119mph with similar 60ft times. I run 11.0's with a shot of juice. I too need some work on my 60ft times.
But mid 12's with 110mph traps is very respectable.
But mid 12's with 110mph traps is very respectable.
