02' Z28 ran 12.97@111.08 (bone stock)
#82
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Jan 2007
Location: bentonville, arkansas
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
well guys, my 10 bolt is busted! my carrier started making noise a couple days before, but i went anyway. i finally made it to the dragstrip. i made 3 passes 7 1/2 hours. we got to tulsa dragstrip at 2pm made 1 pass and had to wait for them to clean up a 2 wrecks. then made 2 more before they closed. it was horrible! my best run was a 13.3@106mph i have never been so disappointed in my life. i couldn't hook up until the end of third gear. i had to keep letting off the gas to catch traction in first, second, and third. i barely made it home on my popping, clanking rearend. my car is now parked at the shop i work at and will not be moving until i save enough money for a moser 9inch. i bought cheap beatup old s10 to get me around until then. this sucks! i miss my car!!!!!!!!!
#83
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Jan 2007
Location: bentonville, arkansas
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
to those of u that are subscribing to this thread, i will keep you posted on what is going on. i will be going back to the drag strip as soon as they open again and will post my times. this time i will be rollin on slicks with a moser 9" and 4.11 gears!
#88
TECH Fanatic
iTrader: (6)
Join Date: Sep 2007
Location: Charlotte, NC / Ansonia,CT
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
congrats on the runs man, sry for the breakage =(
but yea i was lookin for my slips cause i wanted to scan them and show u guys my passes the first week i had my car. i was just shy of breakin 12's but my traps were around 110-113, the one pass i got good traction and i got a good reaction time i hit a 13.07 @ 113, i have the video on my camera just no way to put it on the pc cause my girl lost the cord =P
i also have a few of noyzees runs on there too haha, but yea good luck with your car =)
edit:
i was having the same problems u were having but i was still spinning some of 4th, so i started playin around and i found the best launch was at 1200 rpm and shifting to second at about 5100 then gettin fully on it and stayin in it it hurt my trap a lil but got my ET down.
but yea i was lookin for my slips cause i wanted to scan them and show u guys my passes the first week i had my car. i was just shy of breakin 12's but my traps were around 110-113, the one pass i got good traction and i got a good reaction time i hit a 13.07 @ 113, i have the video on my camera just no way to put it on the pc cause my girl lost the cord =P
i also have a few of noyzees runs on there too haha, but yea good luck with your car =)
edit:
i was having the same problems u were having but i was still spinning some of 4th, so i started playin around and i found the best launch was at 1200 rpm and shifting to second at about 5100 then gettin fully on it and stayin in it it hurt my trap a lil but got my ET down.
#89
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Jan 2007
Location: bentonville, arkansas
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
congrats on the runs man, sry for the breakage =(
but yea i was lookin for my slips cause i wanted to scan them and show u guys my passes the first week i had my car. i was just shy of breakin 12's but my traps were around 110-113, the one pass i got good traction and i got a good reaction time i hit a 13.07 @ 113, i have the video on my camera just no way to put it on the pc cause my girl lost the cord =P
i also have a few of noyzees runs on there too haha, but yea good luck with your car =)
edit:
i was having the same problems u were having but i was still spinning some of 4th, so i started playin around and i found the best launch was at 1200 rpm and shifting to second at about 5100 then gettin fully on it and stayin in it it hurt my trap a lil but got my ET down.
but yea i was lookin for my slips cause i wanted to scan them and show u guys my passes the first week i had my car. i was just shy of breakin 12's but my traps were around 110-113, the one pass i got good traction and i got a good reaction time i hit a 13.07 @ 113, i have the video on my camera just no way to put it on the pc cause my girl lost the cord =P
i also have a few of noyzees runs on there too haha, but yea good luck with your car =)
edit:
i was having the same problems u were having but i was still spinning some of 4th, so i started playin around and i found the best launch was at 1200 rpm and shifting to second at about 5100 then gettin fully on it and stayin in it it hurt my trap a lil but got my ET down.
#92
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Jan 2007
Location: bentonville, arkansas
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
still havent been able to afford the 9inch due to an $850 speeding ticket so i just took some of my buddy's spare parts and rebuilt my 10bolt. this is just temporary so i would have something to drive. after breaking two 10bolts in my truck and two in my car i could probably rebuild one with my eyes closed. i hate 10bolts!
#94
11 Second Club
congrats, not many make it into the 12's stock, let alone with that high a trap. maybe the exhaust makes that much of a difference, who knows. but i guess im one of the only ones having a hard time believing a 111mph trap on a stock car, thats good for mid 12s on a drag radial.
keep us up to date on this freak
keep us up to date on this freak
So by cutting out the muffler he basically made himself a homemade cutout. The only difference is he can't close it. So besides saving a little weight he also gained 7-10 rwhp. That unfortunately made his car NOT stock at the time of the runs. But that in no way takes away from the fantastic times. For a cutout only car that is extremly good for 60', ET and trap.
Nice runs and I hope you get the car up and running with a 12 bolt soon!
#97
Here's a little food for thought. My stock 2002 Z/28 did a 8.12 at 88 mph on a 1.95 60'. Stripper with free ram air and Hurst shifter.
#100
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Jan 2007
Location: bentonville, arkansas
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
it will be warm soon so the strip will be opening up. i still dont have the cash for a 9inch so i guess i'll just throw drag radials on the 10bolt and see wat happens. even if i go home on a trailer i should be able to get in a few runs. all i need is one run better than a 12.9 so i can finally feel better about last season.