Ls1freak33- 370/D1
One thing I just thought about Evan, if it truly was at 120 degrees timing during start up then there is a very high chance that with trying to light the spark that soon that you're causing a huge spike in cylinder pressure and there is no way it will start with that much timing and even if it did it would sound like this because of detonation for sure.
Send me the log files I can look at them on my computer tomorrow and tell you what I think.
Send me the log files I can look at them on my computer tomorrow and tell you what I think.
One thing I just thought about Evan, if it truly was at 120 degrees timing during start up then there is a very high chance that with trying to light the spark that soon that you're causing a huge spike in cylinder pressure and there is no way it will start with that much timing and even if it did it would sound like this because of detonation for sure.
Send me the log files I can look at them on my computer tomorrow and tell you what I think.
Send me the log files I can look at them on my computer tomorrow and tell you what I think.
We will shoot them over tomorrow.. Between the PMs and this thread I'm not sure what I have and haven't replied to! LOL
It could be the balancer, could be the cam sensor, could be the installation of the cam etc. etc. etc. could be that he accidentally added a zero in to the cranking timing table when copy and pasting etc.
Rockers/pushrods are ruled out, they all checked out fine and we switched back to stock rockers, still knocking.
Springs are next.. Have to order another set and a spring compressor. This is my bet..
Played with the tune and got it to idle a bit better also.
any help will be greatly appriciated......
hopefully some one has a idea, if not im gonna order some new springs to try it out.
hopefully some one has a idea, if not im gonna order some new springs to try it out.
Last edited by ls1freak33; Jul 12, 2012 at 04:56 PM.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Well I'm glad the tune is working for you guys.
If you don't mind Evan send me the tune file so I can give it a once over.
Interested in a few things.
Martinsmall@yahoo.com
If you don't mind Evan send me the tune file so I can give it a once over.
Interested in a few things.
Martinsmall@yahoo.com
Well I'm glad the tune is working for you guys.
If you don't mind Evan send me the tune file so I can give it a once over.
Interested in a few things.
Martinsmall@yahoo.com
If you don't mind Evan send me the tune file so I can give it a once over.
Interested in a few things.
Martinsmall@yahoo.com
Thank god dude. Something simple! Also justin, what plugs are you going to be using? I would suggest the NGK BRFE7's. They are a tad colder than tr6's, but better technology. Thats what Im using.
Well I'm glad the tune is working for you guys.
If you don't mind Evan send me the tune file so I can give it a once over.
Interested in a few things.
Martinsmall@yahoo.com
If you don't mind Evan send me the tune file so I can give it a once over.
Interested in a few things.
Martinsmall@yahoo.com
One step ahead.. We weren't sure to use projected or non projected for a blower. Thanks to one of Martin's posts, we went the correct direction.
Soon as i get A/f and wideband.hooked up will be able.to get it going little better
