Holley Sanden A/C bracket
#1
Holley Sanden A/C bracket
I'm looking for feedback regarding the installation, function and appearance of the new Holley A/C bracket. I've yet to see any real world pics with this installed, so any images you have would be great.
BTW - I'm referring to Holley 20-134 part number.
http://www.holley.com/20-134.asp
BTW - I'm referring to Holley 20-134 part number.
http://www.holley.com/20-134.asp
#3
#4
#5
I've seen the pics with the GM compressor. The stand alone pics of the Sanden style bracket look good, but I would like to see how it looks once installed in comparison to the Kwik bracket.
Anyone?
Anyone?
#6
They just became available so I think you are just going to have to buy one. The other brackets give a pretty good idea of how it will look. The Holley looks to be the best option out there for a factory look.
#7
I'm probably going to get one of these, have the alt/PS bracket already. My only gripe is, I wish it didn't require an adapter plate with Corvette accessory spacing, like the alt/PS bracket. Don't understand why they didn't make it fit the Vette setup without a spacer, and then add a spacer for F body or truck apps.
Jim
Jim
Trending Topics
#10
Sanden SD7 mount.
The Holley mount looks really nice and can't beat the price. Anyone have pictures of the SD7 installed? What pulley offset does it use? Corvette?
Attached is a picture and link to one i've made. The down side is it uses the truck offset and modified F-body waterpump. The compressor tensioner setup has been installed in my 72 Malibu for a year now and has been great.
https://ls1tech.com/forums/conversio...ory-drive.html
Attached is a picture and link to one i've made. The down side is it uses the truck offset and modified F-body waterpump. The compressor tensioner setup has been installed in my 72 Malibu for a year now and has been great.
https://ls1tech.com/forums/conversio...ory-drive.html
Last edited by fox12303; 12-03-2012 at 06:58 PM.
#11
I have mocked up an SD7 compressor in mine and it looks alot better than the larger Sandens most people run.
#13
Rocket, appreciate it if you could post your pics once you install the bracket.
Fox - I too like your self fabricated bracket. Looks better than a lot of the "professional" aftermarket ones!
Fox - I too like your self fabricated bracket. Looks better than a lot of the "professional" aftermarket ones!
#14
Holley 20-134 AC bracket installed!
I installed the Holley bracket with a SD7 A/C compressor this weekend. The install was pretty straight forward and Holley's instructions were spot on! It was refreshing to actually have instructions that matched reality.
I still need to still need to check the clearance of the water pump boss and serpentine belt after running the motor as it is pretty close (this was mentioned in Holley's instructions). I also need to find another location to mount the the PVC catch and trim the engine cover to fit. Overall I am very happy with the quality and looks of the bracket, but I did paint it before I installed it.
The only frustration was getting the correct belt. I ended up going to Auto Zone because they were the only ones locally that could look up the belt based on length, 6PKxxxx (where xxxx is the length of belt in millimeters) versus specific application. I ended up buying four different length belts.
I have installed the Kwik and Holley A/C bracket and personally the Holley bracket is a much easier install (fewer pieces), but I doubt you could go wrong with either.
Here is a list of the parts I used, bear in mind I was using a GM 19155067 Corvette accessory drive setup. All of the part number listed, except the belt, were obtained by cross referencing the part numbers listed in Holley's instructions.. I'll post more pics once I get te PVC, CAI and engine cover installed.
Here is a pic of the bracket after I painted it
The boss on the water pump directly below the throttle body may have to be ground down a bit as the clearance is pretty tight.
I still need to still need to check the clearance of the water pump boss and serpentine belt after running the motor as it is pretty close (this was mentioned in Holley's instructions). I also need to find another location to mount the the PVC catch and trim the engine cover to fit. Overall I am very happy with the quality and looks of the bracket, but I did paint it before I installed it.
The only frustration was getting the correct belt. I ended up going to Auto Zone because they were the only ones locally that could look up the belt based on length, 6PKxxxx (where xxxx is the length of belt in millimeters) versus specific application. I ended up buying four different length belts.
I have installed the Kwik and Holley A/C bracket and personally the Holley bracket is a much easier install (fewer pieces), but I doubt you could go wrong with either.
Here is a list of the parts I used, bear in mind I was using a GM 19155067 Corvette accessory drive setup. All of the part number listed, except the belt, were obtained by cross referencing the part numbers listed in Holley's instructions.. I'll post more pics once I get te PVC, CAI and engine cover installed.
- Holley 20-134 LS AC bracket, high mount passenger side
- Holley 21-1 LS Installation kit, basically an adapter to mount bracket to engine based on accessory backspacing
- Dayco p/n 89337, main drive belt tensioner
- Dayco p/n 89059, smooth idler pulley
- Gates p/n 6PK2525, Serpentine belt
Here is a pic of the bracket after I painted it
The boss on the water pump directly below the throttle body may have to be ground down a bit as the clearance is pretty tight.
#16
#18
Holley Acc Drive
Hey guys, I just got done installing this setup. Extremely well put together. Please excuse the mess of an engine compartment. I really hadn't planned on sharing these so I didn't really pickup. Have stuff all over the place. I highly recommend this setup. Everything went together very nicely. I polished mine and got chrome goodies to go with it. Any questions let me know.
#19
Hey guys, I just got done installing this setup. Extremely well put together. Please excuse the mess of an engine compartment. I really hadn't planned on sharing these so I didn't really pickup. Have stuff all over the place. I highly recommend this setup. Everything went together very nicely. I polished mine and got chrome goodies to go with it. Any questions let me know.
#20
I recently replaced my Kwik bracket with the Holley A/C bracket. I have a Sanden 508 compressor and I'm running the stock 2001 LS1 Corvette alternator/ps bracket on the other side. The Holley documentation was great and the fitment perfect.
Here is one picture with the Kwik bracket and 2 pictures with the new Holley bracket.
Here is one picture with the Kwik bracket and 2 pictures with the new Holley bracket.