Advanced Engineering Tech For the more hardcore LS1TECH residents

4th gen aerodynamics

Thread Tools
 
Search this Thread
 
Old 01-28-2018, 08:39 AM
  #101  
TECH Addict
 
smitty2919's Avatar
 
Join Date: Feb 2012
Posts: 2,103
Received 18 Likes on 16 Posts
Default

I agree. I did some measuring last night. My K member is roughly 4" off the ground. Bringing that out to the nose is actually cutting the nose height in half just about.

First thing I thought was "hell I won't be able to pull in my own driveway!" lol

This is not something I want to add/remove for simple autocross days. If I was spending a weekend on a road course...sure.
Old 01-28-2018, 10:30 AM
  #102  
10 Second Club
iTrader: (8)
 
HioSSilver's Avatar
 
Join Date: Aug 2002
Location: Winchester, VA
Posts: 5,938
Received 431 Likes on 338 Posts

Default

Yea i measured mine last night. The center is about 6.5" and where it dips lower to go around the sides is a little less than 6"
Old 10-17-2019, 09:45 PM
  #103  
TECH Enthusiast
iTrader: (13)
 
autogeek23's Avatar
 
Join Date: Apr 2011
Location: Parma Heights,Ohio
Posts: 679
Received 11 Likes on 9 Posts

Default

I'm very interested in improving the aero of my f body for more downforce over the winter. I stumbled upon this site to learn more about aero.

https://professionalawesome.com/diy-downforce/
Old 10-17-2019, 10:14 PM
  #104  
10 Second Club
iTrader: (8)
 
HioSSilver's Avatar
 
Join Date: Aug 2002
Location: Winchester, VA
Posts: 5,938
Received 431 Likes on 338 Posts

Default

Those are splitters from hell. They wouldn't last long on the street and get ripped off after the first off track excursion.

I'll get to spend some time on my 4gen here again soon. My motor is almost done.



Quick Reply: 4th gen aerodynamics



All times are GMT -5. The time now is 12:12 AM.