TA bumper on Camaro??
Thread Starter
TECH Regular
iTrader: (7)
Joined: Jul 2005
Posts: 401
Likes: 0
From: Little Creek, VA
TA bumper on Camaro?? some people may remember the guy who was selling CME valances and planned on doing a valence that would work with corsa tips and then went MIA.
well, ive been wanting a valence for my exhaust and i just happened to pass a TA the other day, so i started thinking, has anyone ever put a TA bumper on a Camaro? am i crazy for thinking it might be a good idea?
i thought maybe id try to find a junked TA to get the bumper. it would most definitely require quite a bit of cutting and fabbing to get it to fit, but does anyone think its doable?
im only hesitant to try this because ive seen some of the bastard TA/Camaro creations and i dont want my baby thrown in with that group.
well, ive been wanting a valence for my exhaust and i just happened to pass a TA the other day, so i started thinking, has anyone ever put a TA bumper on a Camaro? am i crazy for thinking it might be a good idea?
i thought maybe id try to find a junked TA to get the bumper. it would most definitely require quite a bit of cutting and fabbing to get it to fit, but does anyone think its doable?
im only hesitant to try this because ive seen some of the bastard TA/Camaro creations and i dont want my baby thrown in with that group.
You may be able to graft the lower half of the Ta bumper to the one off the camaro but as for fitting the whole piece I doubt it. Probably not too much work in plastic welding the valance into the other bumper and finishing it out. But the two cars are alot different out back as far as quarter panel, and taillight section dimensions. Be awfully cobbled up.
Thread Starter
TECH Regular
iTrader: (7)
Joined: Jul 2005
Posts: 401
Likes: 0
From: Little Creek, VA
You may be able to graft the lower half of the Ta bumper to the one off the camaro but as for fitting the whole piece I doubt it. Probably not too much work in plastic welding the valance into the other bumper and finishing it out. But the two cars are alot different out back as far as quarter panel, and taillight section dimensions. Be awfully cobbled up.
Thread Starter
TECH Regular
iTrader: (7)
Joined: Jul 2005
Posts: 401
Likes: 0
From: Little Creek, VA
Trending Topics
Thread Starter
TECH Regular
iTrader: (7)
Joined: Jul 2005
Posts: 401
Likes: 0
From: Little Creek, VA
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo While I agree that our stock bumper suck I don't think the T/A bumper molded/retrofitted would look good. But I could be wrong
Joined: Aug 2007
Posts: 24,241
Likes: 89
From: Turnin' Wrenches Infractions: 005
Thread Starter
TECH Regular
iTrader: (7)
Joined: Jul 2005
Posts: 401
Likes: 0
From: Little Creek, VA
im at the point where i just have to know what it would looks like. itll prolly look like ****, but ive got nothing better to do.
Thread Starter
TECH Regular
iTrader: (7)
Joined: Jul 2005
Posts: 401
Likes: 0
From: Little Creek, VA
i dont wanna go that far. i just cant stand how ugly the rear bumper is. and i dont want a body kit either.
