Here we go - the Muffinbuster countdown - new pics daily
#2422
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
Maybe,
We never really know until the last minute, and just decide to have one.
So the answer is yes we will have more sales, but I just do not know the timing of them.
If you have a large order you can always call and see if any discounts apply.
Thanks, Roger
We never really know until the last minute, and just decide to have one.
So the answer is yes we will have more sales, but I just do not know the timing of them.
If you have a large order you can always call and see if any discounts apply.
Thanks, Roger
#2423
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
Ok,
Here are some pictures of our C6 Corvette cap set.
Sorry but these are only cell phone pictures.
Machined on a lathe, and laser etched factory markings on the top.
These are not chrome plated, but it will be offered.
We can make these like this for all of the cars, including the Camaro, and Trans Am.
We do have a CNC mill coming, and will be presenting many new billet parts in the near future.
So the caps will change in design, because of more capabilities with the mill. But these look very nice.
MORE BILLET COMING STAY TUNED!!!
Thanks, Roger
Here are some pictures of our C6 Corvette cap set.
Sorry but these are only cell phone pictures.
Machined on a lathe, and laser etched factory markings on the top.
These are not chrome plated, but it will be offered.
We can make these like this for all of the cars, including the Camaro, and Trans Am.
We do have a CNC mill coming, and will be presenting many new billet parts in the near future.
So the caps will change in design, because of more capabilities with the mill. But these look very nice.
MORE BILLET COMING STAY TUNED!!!
Thanks, Roger
Last edited by dragonZ28; 02-12-2011 at 04:30 PM.
#2424
TECH Fanatic
iTrader: (1)
Join Date: Jan 2009
Location: south jersey
Posts: 1,110
Likes: 0
Received 0 Likes
on
0 Posts
wow those caps look good would def like some for my camaro.
but i was wondering would it be possible to make stock z28 elmblem like this:
have the red line around it kinda like this SS emblem?
but i was wondering would it be possible to make stock z28 elmblem like this:
have the red line around it kinda like this SS emblem?
#2425
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
We will have to get them GM licensed to do that, which we are going to check into.
All etching will be black or gold only. It cannot be red.
So, If you want these requests, the option for now is:
You can buy them unetched, and place decals on top of them.
I am not sure GM will allow caps that cover up important safety information. That's why we are etching the existing info on them. We will check and find out if logos are even allowed on them though. I am calling them tomorrow. More pictures coming of the undersides.
Thanks, Roger
#2427
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
So you can see the fitment, and thickness of the caps: Tops and underside of caps pictured above. "not normally shown by others"
We will be starting a seperate thread of billet items soon. Just posting the here for now
Brake
Oil
Power Steering
Radiator
Thanks, Roger
We will be starting a seperate thread of billet items soon. Just posting the here for now
Brake
Oil
Power Steering
Radiator
Thanks, Roger
Last edited by dragonZ28; 02-12-2011 at 04:31 PM.
#2431
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
Please let me know.
Thanks, Roger
#2435
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
Direct number to me is 859-455-9326
If I am not around to answer the phone I will call you back, please leave me a message.
Thanks, Roger
#2438
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
1) Have you tried to see if other types of oil cap threads are the same as yours.
2) We can place a stainless piece in there with whatever etching you need.
The stainless is not as thick as the depression you have, but we can build up from underneath so it is nearly flush with the top.
3) We can place some acrylics in there to add some color to it. Also with etching on it.
4) Finally we can make a one piece billet piece to insert in there, but that would be about a month away since our machine is not here yet.
I would like to do it. Please let me know.
Thanks, Roger
Last edited by dragonZ28; 02-03-2011 at 06:32 PM.
#2439
TECH Fanatic
iTrader: (60)
Join Date: Dec 2006
Location: Reading, PA
Posts: 1,547
Likes: 0
Received 0 Likes
on
0 Posts
2) We can place a stainless piece in there with whatever etching you need.
The stainless is not as thick as the depression you have, but we can build up form underneath so it is nearly flush with the top.
3) We can place some acrylics in there to add some color to it. Also with etching on it.
4) Finally we can make a one piece billet piece to insert in there, but that would be about a month away since our machine is not here yet.
I would like to do it. Please let me know.
Thanks, Roger
The stainless is not as thick as the depression you have, but we can build up form underneath so it is nearly flush with the top.
3) We can place some acrylics in there to add some color to it. Also with etching on it.
4) Finally we can make a one piece billet piece to insert in there, but that would be about a month away since our machine is not here yet.
I would like to do it. Please let me know.
Thanks, Roger
#2440
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
My dad for some reason did not thread the caps in so they line up properly, so please excuse the caps looking like the labels are misaligned. The labels are right, and I personally placed them onto the factory caps with the labels exactly lined up with the factory info. Anyway, here are some installed pics:
We also dressed the FRCs up on this car with hydrographics, and lettering inserts. Another heads up, we will be making GM Official Licensed versions of caps with logos. We talked with our GM rep today, and we will be doing it. Also, our mill will be shipping next Wednesday, so we'll have some really cool items coming out soon.
We also dressed the FRCs up on this car with hydrographics, and lettering inserts. Another heads up, we will be making GM Official Licensed versions of caps with logos. We talked with our GM rep today, and we will be doing it. Also, our mill will be shipping next Wednesday, so we'll have some really cool items coming out soon.
Last edited by dragonZ28; 02-12-2011 at 04:32 PM.