Here we go - the Muffinbuster countdown - new pics daily
#765
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys,
We've been busy working, working, and more working. I will do my best to answer all of your questions after work today.
A new item will also be posted today.
Here is what will happen on the GM licensing. We have about 130 new items approved for manufacture. Some of these items are for Corvettes, and other cars. However, many as you have seen are for the F- bodies.
Some of the the most recent pieces we have made, will not be on the first contract we get, but they have been submitted as of today. This means they will provide us with a addendum to the contract, by adding new parts to it. I was told today the adding of new parts takes only a couple of weeks. What this means is that we will be able to sell everything at first, except for a few items, we just designed. Then a couple of weeks later those will be able to be sold. I was told today that someone was on vacation, related to our contract, but they will be back in the office on Monday to work on our contract. That's good news. I Just want to keep you guys up to date.
FYI for you guys, we have submitted LT1, LS1, LS2, LS3, LS4, LS6, LS7 WS9, etc... in the ZR1 style emblem. Those are only under GM contract as long as we place Camaro, Corvette, Gran Prix etc... or some GM logo on them. If you guys simply want 5.7 liter, Performance Package, Mustangs are slow, etc... We can make those for you right now. If you fall into this category, place your order. You will have your piece in about 4 days. If you are not sure if we are able to make something at this time ask, and I will let you know.
Thanks for all of your patience!!! Muffinbuster is coming out large!!
Also if you type www.muffinbuster.com
it takes you to www.emblempros.com website
We've been busy working, working, and more working. I will do my best to answer all of your questions after work today.
A new item will also be posted today.
Here is what will happen on the GM licensing. We have about 130 new items approved for manufacture. Some of these items are for Corvettes, and other cars. However, many as you have seen are for the F- bodies.
Some of the the most recent pieces we have made, will not be on the first contract we get, but they have been submitted as of today. This means they will provide us with a addendum to the contract, by adding new parts to it. I was told today the adding of new parts takes only a couple of weeks. What this means is that we will be able to sell everything at first, except for a few items, we just designed. Then a couple of weeks later those will be able to be sold. I was told today that someone was on vacation, related to our contract, but they will be back in the office on Monday to work on our contract. That's good news. I Just want to keep you guys up to date.
FYI for you guys, we have submitted LT1, LS1, LS2, LS3, LS4, LS6, LS7 WS9, etc... in the ZR1 style emblem. Those are only under GM contract as long as we place Camaro, Corvette, Gran Prix etc... or some GM logo on them. If you guys simply want 5.7 liter, Performance Package, Mustangs are slow, etc... We can make those for you right now. If you fall into this category, place your order. You will have your piece in about 4 days. If you are not sure if we are able to make something at this time ask, and I will let you know.
Thanks for all of your patience!!! Muffinbuster is coming out large!!
Also if you type www.muffinbuster.com
it takes you to www.emblempros.com website
#773
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
However, the sills are too long to get into our machine. So, due to size limitations we can't etch them. I think it's about the only piece we cannot etch. There are other options for placing letters on there.
#775
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
I will know in a day or so.
Matt
#777
11 Second Club
iTrader: (3)
[QUOTE=dragonZ28;11398058]Dropping the hammer yet again...
Introducing our Z28 ZR1 Style Emblem. This piece has a raised, red acrylic "Z" with a recessed "28" with a high-gloss black finish. The faceplate is done in mirror stainless steel with "CHEVROLET" etched permanently in black using our C5 font. Again, everything on this piece is laser-cut for precision.
Enjoy, guys.
When Is all going to be avalible on the web site? That **** is just sexy
Introducing our Z28 ZR1 Style Emblem. This piece has a raised, red acrylic "Z" with a recessed "28" with a high-gloss black finish. The faceplate is done in mirror stainless steel with "CHEVROLET" etched permanently in black using our C5 font. Again, everything on this piece is laser-cut for precision.
Enjoy, guys.
When Is all going to be avalible on the web site? That **** is just sexy
#779
TECH Enthusiast
iTrader: (5)
Join Date: Jun 2008
Location: O'fallon, Mo.
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
Yes, we can get any parts out of brushed stainless, and we can etch on the brushed surface.
However, the sills are too long to get into our machine. So, due to size limitations we can't etch them. I think it's about the only piece we cannot etch. There are other options for placing letters on there.
However, the sills are too long to get into our machine. So, due to size limitations we can't etch them. I think it's about the only piece we cannot etch. There are other options for placing letters on there.
#780
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
It would be just as permanent as applying an emblem to your car, or permanently attaching the door sills to your jamb. Once we put it on there, it is not coming off unless intentional damage is meant to occur.
What we can do is etch the lettering you want on a smaller plate, and attach the small plate to the sills.
Thanks, Matt
What we can do is etch the lettering you want on a smaller plate, and attach the small plate to the sills.
Thanks, Matt