Here we go - the Muffinbuster countdown - new pics daily
#1043
can you also do the pontiac like this in the carbon fiber look?
#1044
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
We can, but it looks cheap because it is blatantly fake. I can get the material, so making it would not be a problem. I do not have that material in stock, but I can drive 5 minutes up the street and pick some up at any time.
We would also be able to etch and color the centers to your liking.
I'm not promising to make any or post them up - I'm just saying that I could do it. I just don't think it looks good.
We would also be able to etch and color the centers to your liking.
I'm not promising to make any or post them up - I'm just saying that I could do it. I just don't think it looks good.
#1046
Launching!
Here is a battery cover, as promised. This is one of our old-style covers, so the new ones will not have the open corners like pictured here. We etched this because we had it laying around.
These are priced to be $65 with etching of logo/logos of your choice, and plain they are $40 each. These are made from 18GA mirror stainless steel, and they have a black, permanent etch.
These are priced to be $65 with etching of logo/logos of your choice, and plain they are $40 each. These are made from 18GA mirror stainless steel, and they have a black, permanent etch.
#1047
Launching!
Here are some new CAMARO fill-ins I have made, and as far as I know, they're the only ones that exist. I have 2 styles shown here.
1 - Stainless Steel with the center body etched in black. These have a mirror-reflective quality around the edges - these will look awesome in your guys' Berger panels
2 - Multi-layer Composite plastic with a red surface and black under-layer. The red is etched away in the center to expose the black. The end result is a red outline and black center. These can be done with several different color combinations if you want something different.
The pricing may be an additional $10-$15 due to machine time.
STAINLESS STEEL ETCHED CAMARO FILLS:
MULTI-LAYER, UV-RATED COMPOSITE PLASTIC:
1 - Stainless Steel with the center body etched in black. These have a mirror-reflective quality around the edges - these will look awesome in your guys' Berger panels
2 - Multi-layer Composite plastic with a red surface and black under-layer. The red is etched away in the center to expose the black. The end result is a red outline and black center. These can be done with several different color combinations if you want something different.
The pricing may be an additional $10-$15 due to machine time.
STAINLESS STEEL ETCHED CAMARO FILLS:
MULTI-LAYER, UV-RATED COMPOSITE PLASTIC:
#1050
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
They are already drawn. I just need to cut the file, and test fit.
They will have logos available in the black etch as well.
Give me one week to get a prototype up on this site.
75/35, 75/25/ and 34/78 will be available
#1052
I have a list of things I want! lol I have been looking at your products and drawing up custom ideas that I will shoot your way when we are able to actually order.. I hope that is ok with you guys..
#1060
TECH Apprentice
iTrader: (4)
Join Date: Dec 2005
Location: Garden City, Kansas
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
Damnit! i just ordered the plain mirrored stianless steel ones for the pontiac on there rear a couple days ago and now the mirrored with the black etched in the middle look bad ***! I may have to order those instead and figure something else out to do with the other ones. You think youll do the mirrored with the ectched black for the bird on the front to?