Here we go - the Muffinbuster countdown - new pics daily
05-05-2009, 12:57 AM
#1321
True indeed! 
LOL, i've been debating it for weeks...i'm scared too, lol!!
thanks for the tips....and I returned your PM. 
Lets get on this, Mark!! 
Get some Plastic Weld. It is for bonding plastics but I use it as a plastic clear coat as well.
Comes in a bottle with a brush applicator. Dries smooth though. I used it to stick my stainless bezel to my ABS bezel and then just brushed it all over the ABS that still showed. Took it from a grey to a gloss black, just like you want.
Can't really mess up either since it dries uniform and quick. Tape off the painted area of the car and take your time, it will look great.
Comes in a bottle with a brush applicator. Dries smooth though. I used it to stick my stainless bezel to my ABS bezel and then just brushed it all over the ABS that still showed. Took it from a grey to a gloss black, just like you want.
Can't really mess up either since it dries uniform and quick. Tape off the painted area of the car and take your time, it will look great.
Swing by that hobby store we got the paint from tomorrow, pick it up and then swing by here...
05-05-2009, 07:51 AM
#1324
On The Tree
iTrader: (1)
Join Date: Nov 2008
Location: Jamesburg, NJ
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
I had to remove mine because the edge of one of the wings started lifting.
05-05-2009, 10:49 AM
#1326
Launching!
iTrader: (2)
Join Date: Aug 2005
Location: Lubbock/Tomball, TX
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Get some Plastic Weld. It is for bonding plastics but I use it as a plastic clear coat as well.
Comes in a bottle with a brush applicator. Dries smooth though. I used it to stick my stainless bezel to my ABS bezel and then just brushed it all over the ABS that still showed. Took it from a grey to a gloss black, just like you want.
Can't really mess up either since it dries uniform and quick. Tape off the painted area of the car and take your time, it will look great.
Comes in a bottle with a brush applicator. Dries smooth though. I used it to stick my stainless bezel to my ABS bezel and then just brushed it all over the ABS that still showed. Took it from a grey to a gloss black, just like you want.
Can't really mess up either since it dries uniform and quick. Tape off the painted area of the car and take your time, it will look great.
05-05-2009, 12:04 PM
#1330
On The Tree
iTrader: (1)
Join Date: Nov 2008
Location: Jamesburg, NJ
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
No problem....BTW - if you need an LT1-based Firebird, I'll be happy to take precise measurements and photos to help you out. If I were closer, I'd drive over.
Things I'd be interested in for our model years:
Fuse box cover, battery cover, fluid caps, ashtray cover (something to dress up the lid perhaps), etc.
Keep the goodies coming...
Things I'd be interested in for our model years:
Fuse box cover, battery cover, fluid caps, ashtray cover (something to dress up the lid perhaps), etc.
Keep the goodies coming...
05-05-2009, 01:20 PM
#1331
can you do this for the trans am trifecta? the rear pontiac inset the trans am overlays and the front bird??? if so this is exactly what I have been looking for? could you also do a pentefecta lol, with a ws6 badge this style and an ls1 trans am or 5.7L that style as a package?????
05-05-2009, 02:29 PM
#1332
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
I will have that package listed tonight, hopefully. We're trying our best to churn out as many orders as possible while getting the website wrapped up. If you want those other emblems added to a package, you'll have to send an email to get it done, but we can do it.
05-05-2009, 03:22 PM
#1333
11 Second Club
iTrader: (118)
Join Date: Jan 2004
Location: RGV texas
Posts: 2,994
Likes: 0
Received 0 Likes
on
0 Posts
DRAGON: can you make one of those zr1 in white? i didnt see white on the color chart? and how would i place that in the grille?
do you make a bowtie that would look like the one that berger/dick harrel put on their grills?
do you make a bowtie that would look like the one that berger/dick harrel put on their grills?
05-05-2009, 07:33 PM
#1335
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
We are also not sure what you mean about inserting the ZR1 emblem into the grille. What part of the ZR1 did you want white?
05-06-2009, 06:31 AM
#1338
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
No problem....BTW - if you need an LT1-based Firebird, I'll be happy to take precise measurements and photos to help you out. If I were closer, I'd drive over.
Things I'd be interested in for our model years:
Fuse box cover, battery cover, fluid caps, ashtray cover (something to dress up the lid perhaps), etc.
Keep the goodies coming...
Things I'd be interested in for our model years:
Fuse box cover, battery cover, fluid caps, ashtray cover (something to dress up the lid perhaps), etc.
Keep the goodies coming...
05-06-2009, 07:22 AM
#1339
On The Tree
iTrader: (1)
Join Date: Nov 2008
Location: Jamesburg, NJ
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
Just let me know...I could even send small parts to you. The car is not my daily driver, so missing small parts for a while is no big deal.
If I can help the LT1 community...I'm all in!
If I can help the LT1 community...I'm all in!
05-06-2009, 09:14 AM
#1340
this is the 5.7 design I have been looking for: this is from the 04 gtos i would like it to say 5.7 LS1 in that font/style. matt let me know what you can do. Thanks! this could be part of the pentefecta now trifecta for the trans am ws6s!!!! in that style.