Here we go - the Muffinbuster countdown - new pics daily
03-08-2009, 02:51 PM
#161
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
Today's item:
Camaro front and rear inserts. The fronts fit 98-02, the rears fits 93-02.
Stainless Steel Rear fills: $35.00
Acrylic Rear fills: $30.00 comes in many colors!!!!
Plastics fills: $30.00 comes in many colors!!!!
Stainless Steel Front fills: $30.00
Acrylic Front fills: $27.00 comes in many colors!!!!
Plastics fills: $30.00 comes in many colors!!!!
Camaro front and rear inserts. The fronts fit 98-02, the rears fits 93-02.
Stainless Steel Rear fills: $35.00
Acrylic Rear fills: $30.00 comes in many colors!!!!
Plastics fills: $30.00 comes in many colors!!!!
Stainless Steel Front fills: $30.00
Acrylic Front fills: $27.00 comes in many colors!!!!
Plastics fills: $30.00 comes in many colors!!!!
Last edited by dragonZ28; 09-16-2010 at 10:47 AM.
03-08-2009, 03:43 PM
#162
TECH Veteran
iTrader: (4)
Join Date: Aug 2006
Location: San Marcos/Plano, Texas
Posts: 4,821
Likes: 0
Received 0 Likes
on
0 Posts
Today's item:
Camaro front and rear inserts. The fronts fit 98-02, the rears fits 93-02.
Stainless Steel Rear fills: $35.00
Acrylic Rear fills: $30.00 comes in many colors!!!!
Plastics fills: $30.00 comes in many colors!!!!
Stainless Steel Front fills: $30.00
Acrylic Front fills: $27.00 comes in many colors!!!!
Plastics fills: $30.00 comes in many colors!!!!
Camaro front and rear inserts. The fronts fit 98-02, the rears fits 93-02.
Stainless Steel Rear fills: $35.00
Acrylic Rear fills: $30.00 comes in many colors!!!!
Plastics fills: $30.00 comes in many colors!!!!
Stainless Steel Front fills: $30.00
Acrylic Front fills: $27.00 comes in many colors!!!!
Plastics fills: $30.00 comes in many colors!!!!
03-08-2009, 03:48 PM
#163
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
Actually we do not do any chrome work at all.
We have had customers get pieces chrome plated, powdercoated etc...
I will need to check, but I think there is a black titanium that has the look you want. I also do not know a cost on that material at this time. I will try to find out some information.
We have had customers get pieces chrome plated, powdercoated etc...
I will need to check, but I think there is a black titanium that has the look you want. I also do not know a cost on that material at this time. I will try to find out some information.
03-08-2009, 06:54 PM
#164
TECH Fanatic
iTrader: (9)
Join Date: Jun 2004
Location: Ewing NJ
Posts: 1,249
Likes: 0
Received 0 Likes
on
0 Posts
Hey Matt I've been watching this thread everyday and see some great work coming out of your shop.
Since you mentioned third gen RS items would you make other third gen stuff like a gold mirrored gta emblems with black fillins maybe in that black titanium finish. Just an idea because what people are charging for licensed gta emblems are silly.
I know we had talked in a pm about it but just figured I would mention it in here incase it created some buzz from other GTA owners.
Since you mentioned third gen RS items would you make other third gen stuff like a gold mirrored gta emblems with black fillins maybe in that black titanium finish. Just an idea because what people are charging for licensed gta emblems are silly.
I know we had talked in a pm about it but just figured I would mention it in here incase it created some buzz from other GTA owners.
03-08-2009, 11:24 PM
#166
TECH Veteran
iTrader: (4)
Join Date: Aug 2006
Location: San Marcos/Plano, Texas
Posts: 4,821
Likes: 0
Received 0 Likes
on
0 Posts
Actually we do not do any chrome work at all.
We have had customers get pieces chrome plated, powdercoated etc...
I will need to check, but I think there is a black titanium that has the look you want. I also do not know a cost on that material at this time. I will try to find out some information.
We have had customers get pieces chrome plated, powdercoated etc...
I will need to check, but I think there is a black titanium that has the look you want. I also do not know a cost on that material at this time. I will try to find out some information.
03-09-2009, 12:43 PM
#172
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
PONTIAC inserts for the rear panel of 93-02 Firebirds (all models)
Mirror Stainless PONTIAC fill-ins: $40.00
Acrylic PONTIAC fill-ins: $36.00
Installed Stainless steel inserts:
Acrylic PONTIAC inserts:
Mirror Stainless PONTIAC fill-ins: $40.00
Acrylic PONTIAC fill-ins: $36.00
Installed Stainless steel inserts:
Acrylic PONTIAC inserts:
Last edited by dragonZ28; 09-14-2010 at 03:34 PM.
03-09-2009, 02:31 PM
#175
Maybe you'll like these better...
The emblempros.com True ZR1 style LS emblems. These are highly customizeable. We have 2 different styles - Mirror Stainless Face, and Plastic Face with brushed metal finish. This is one of our hybrid emblems that uses different materials to give the emblem an ultra-custom look, and also a lot of "flavor".
So there are no questions about the material, I offer one style with a real metal face. It is a real mirror stainless face. I won't try to sell plastic as metal, but I do offer both versions. If you don't want real metal, and the plastic version is fine with you, I'm looking out for you too.
First off, let me state what this is. The "LS#" are all laser cut from the stainless or plastic face. Underneath is a high gloss piece of black acrylic so your "LS" has a deep shine, and is recessed from the face - not simply etched. The 1,2,3,7, etc are all raised mirror acrylic inserts that will be available in a color of your choice and reflect just as good as a mirror themselves. The logo script, ie "Trans Am' is etched into both the plastic, and stainless face. Both etches are done in black, so the name does stand out. We can also put any wording of your choice on top instead of the name of a car for those of you who have done LS swaps into different vehicles, or those who want to put engine info such as HP ratings.
Let me lay down the tentative pricing after the licensing is finalized.
Mirror Stainless True ZR1 style emblem - $44.99
Composite Plastic True ZR1 style emblem - $34.99
For comparison reasons, here is an actual GM ZR1 emblem. Be sure to compare ours to notice all the design similarities:
Here are the pics (not renders) of emblempros.com's Mirror Stainless True ZR1 style emblems:
Here is a pic of emblempros.com's Composite Plastic True ZR1 style emblems:
Here is a pic of a few with regular plastic inserts - not mirror acrylic:
I expect these to be a really hot item. They look awesome in person!
The emblempros.com True ZR1 style LS emblems. These are highly customizeable. We have 2 different styles - Mirror Stainless Face, and Plastic Face with brushed metal finish. This is one of our hybrid emblems that uses different materials to give the emblem an ultra-custom look, and also a lot of "flavor".
So there are no questions about the material, I offer one style with a real metal face. It is a real mirror stainless face. I won't try to sell plastic as metal, but I do offer both versions. If you don't want real metal, and the plastic version is fine with you, I'm looking out for you too.
First off, let me state what this is. The "LS#" are all laser cut from the stainless or plastic face. Underneath is a high gloss piece of black acrylic so your "LS" has a deep shine, and is recessed from the face - not simply etched. The 1,2,3,7, etc are all raised mirror acrylic inserts that will be available in a color of your choice and reflect just as good as a mirror themselves. The logo script, ie "Trans Am' is etched into both the plastic, and stainless face. Both etches are done in black, so the name does stand out. We can also put any wording of your choice on top instead of the name of a car for those of you who have done LS swaps into different vehicles, or those who want to put engine info such as HP ratings.
Let me lay down the tentative pricing after the licensing is finalized.
Mirror Stainless True ZR1 style emblem - $44.99
Composite Plastic True ZR1 style emblem - $34.99
For comparison reasons, here is an actual GM ZR1 emblem. Be sure to compare ours to notice all the design similarities:
Here are the pics (not renders) of emblempros.com's Mirror Stainless True ZR1 style emblems:
Here is a pic of emblempros.com's Composite Plastic True ZR1 style emblems:
Here is a pic of a few with regular plastic inserts - not mirror acrylic:
I expect these to be a really hot item. They look awesome in person!
Wow.....I want that ls1 trans am emblem!!!!!
03-09-2009, 07:39 PM
#176
TECH Regular
Join Date: Jun 2006
Location: Alamo Heights, Texas
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
I'm going to be ordering so much **** from you.. the price/work is amazing, and those zr1 emblems are just sick. Are you able to customize them? like "Daez LS6" on the zr1 emblems?(just an example). I'm going to end up picking up 3 of those zr1 emblems, some inserts, and a hood emblem at least.
03-09-2009, 08:24 PM
#178
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
I'm going to be ordering so much **** from you.. the price/work is amazing, and those zr1 emblems are just sick. Are you able to customize them? like "Daez LS6" on the zr1 emblems?(just an example). I'm going to end up picking up 3 of those zr1 emblems, some inserts, and a hood emblem at least.
03-09-2009, 08:29 PM
#179
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
The overlays on the grills are the best, most secure way to do them. Our pattern matches the factory grill perfectly and it is practically impossible to even see it. I have some very nice close up pictures if you want them posted, but I need to watermark them first. Please let me know.
Thanks for the interest in our products
