6LE/McNord Gauge Bezel... New style, check it out!
#24
On The Tree
iTrader: (4)
Join Date: Jul 2008
Location: St. Helens, Oregon
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
What about a bezel for the pre 98 camaro's? I've always thought one would look good in there, I'd buy one made out of smooth plastic that I could paint silver that would work with the stock setup.
#27
Copy & Paste Moderator
Thanks. It was just an idea, I don't want to put you out. I'm interested, but not sure if I'd get it just yet (I have a Formula which already has a bezel), but others might. Cost would be a big determining factor though.
#31
Launching!
iTrader: (3)
Join Date: Feb 2008
Location: Lake Murray, SC
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Yes, and its not hard at all. Most people write down where exactly the needles sit and then reinstall accordingly. Overlays are done by the thousands by regular people like you and me.
#32
Put them in the way wrong spot and they WILL grab but it is pretty easy NOT to do that by just following the write-up they come with.
Also takes 10 seconds for a shop to plug in their laptop and check them for you...
#33
Launching!
iTrader: (3)
Join Date: Feb 2008
Location: Lake Murray, SC
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Mark, I would be down for a GTO style one for sure! I wouldnt even mind paying a pretty penny for it either. It think that design would sell really well, even versus the plain ABS OEM style. Let me know if you want to make one and I will be the test car. You can ship it with my overlay and Ill install it all with my new LEDs at one time.
Ryan
Ryan
#35
Mark, I would be down for a GTO style one for sure! I wouldnt even mind paying a pretty penny for it either. It think that design would sell really well, even versus the plain ABS OEM style. Let me know if you want to make one and I will be the test car. You can ship it with my overlay and Ill install it all with my new LEDs at one time.
Ryan
Ryan