Aftermarket Halo install around Projector fog lights on my Formula...
#21
Copy & Paste Moderator
Originally Posted by CALL911
I'm not really sure what the cutoff shield is.
Typically a low beam is stepped: _____/-----------
Typically a fog beam is flat:_____________
I'm guessing you left it as a low beam pattern or did you buy a fog light version of the projector?
#22
It still has the cutt-off shielf inside of the projector. However they are aimed so low its hard to see the cutoff line. I will be adjusting them sometime to aim them a little higher, thats when I'll try to get the pics. I'm pretty busy usually (currently in USAF pilot training), but I hope to get this done sometime this weekend.
#23
Copy & Paste Moderator
Originally Posted by CALL911
It still has the cutt-off shielf inside of the projector.
Originally Posted by CALL911
However they are aimed so low its hard to see the cutoff line. I will be adjusting them sometime to aim them a little higher, thats when I'll try to get the pics.
Last edited by VIP1; 11-07-2009 at 07:52 PM.
#24
I adjusted them today (haven't checked them out at night yet). Unfortunatley, as I suspected, the area was WAY too small to get my camera to fit into. I could have taken pictures aiming up into them from outside, but it would not have shown any of the bracketry or how they fit. Sorry.
I love the look of the Hellas with Halos. The light output was a bit better just by going with the H4 bulbs in the projectors. About a month ago I installed some HID's though and now they are KILLER, but just aimed a bit low (which hopefully is fixed now )
I love the look of the Hellas with Halos. The light output was a bit better just by going with the H4 bulbs in the projectors. About a month ago I installed some HID's though and now they are KILLER, but just aimed a bit low (which hopefully is fixed now )
#25
Copy & Paste Moderator
H4? I don't think there is an H4 version of any projector since H4 is dual filament. Did you mean H7 or H9? (I know the Hella 90mm comes in H7 & H9 versions. What's the part number of the ones you have?)
That halo ring does look good there. It helps fill the gap around the projectors since they are a little smaller than the opening in the bumper.
That halo ring does look good there. It helps fill the gap around the projectors since they are a little smaller than the opening in the bumper.
#27
Copy & Paste Moderator
I just added this thread and your other thread from March to the Firebird Fog Light section in the Lighting FAQ.
#30
TECH Enthusiast
CALL911 - do the 120MM use H9's as well? I read your earlier thread when you installed the projectors and you said that 90MM produced a gap which you later filled using a Halo. Is this the 120MM you were referring to that was out of stock at the time http://www.rallylights.com/Hella_120...p_Modules.aspx ? And I'm thinking that I need to replace my 880's for H9's once I purchase the projectors correct?
#31
CALL911 - do the 120MM use H9's as well? I read your earlier thread when you installed the projectors and you said that 90MM produced a gap which you later filled using a Halo. Is this the 120MM you were referring to that was out of stock at the time http://www.rallylights.com/Hella_120...p_Modules.aspx ? And I'm thinking that I need to replace my 880's for H9's once I purchase the projectors correct?
If you do end up getting a set of fogs that utilize the H9's, and want a good deal give me a PM. I can give you a good price on my H9 bulbs. I only had them in the car for a short period of time, and they still are in new condition.
#32
Hey Call911, do you have HID low beams as well? I have HID low beams and installed HID fog lights as well but I kept burning out the accessories fuse and my radio was all funny. What style of HID fogs did you use? Single or dual ballast system?
Your car looks great btw
Your car looks great btw