Trans am seats in a '99 Z28
#1
Staging Lane
Thread Starter
Join Date: Mar 2002
Location: Boca Raton, Florida
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I just purchased Trans Am articulated seats to replace the horrible stock seats in my '99 Z28. Has anyone done this and know the wiring conversion for the driver's seat (6 wires to 2)? Any help appreciated.
#2
TECH Senior Member
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I did it to my 2000. The conversion is easy, IF you get the 6 wire 2 hose wiring harness that goes from driver's seat to passenger seat. The 2 wire harness under the driver's seat will plug into the 6 wire harness and then connect to both seats. The harness goes under the center console. The air pump for the articulating features is under the passenger seat. Unfortunately I have never been able to get the part number for this from the Pontiac Dealerships. I sure hope you can get it out of the donor car.