I am putting the SS side badges back on my car soon and need measurements.
Let's say you are looking at the pass. side of the car.

I need from the left (the door "crack") to the first S.
I also need the bottom of the S to the top of the crease, not molding, that is indented on both sides of the car.

MM is preferable and I need a few different measurements to see if everyone comes out about the same.
THANKS!
Nick

 

Passenger side:

From the top of the crease, go up 3cm to the bottom of the SS.
From the edge of the fender at the door seam, go over 8.2cm to the left side of the SS.

Just reverse that for the driver side.

 

Thanks!!!!
Nick