Relocate Coil Packs
09-23-2009, 08:26 PM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Aug 2009
Location: Stephenville, Texas
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Relocate Coil Packs who sells a complete coil pack relocation kit? i wanna clean up my engine bay and the coil packs are the biggest eye sore. Anyone have pics of this?
Thanks
Lance
Thanks
Lance
09-23-2009, 08:32 PM
#2
https://ls1tech.com/forums/sponsor-s...nce-parts.html
That's where I got mine from. Very nice and complete kit. I have mounted up front on the side of the frame rails.
That's where I got mine from. Very nice and complete kit. I have mounted up front on the side of the frame rails.
Trending Topics
09-25-2009, 09:37 PM
#8
TECH Resident
iTrader: (16)
Join Date: Feb 2007
Location: Baytown, Tx
Posts: 802
Likes: 0
Received 0 Likes
on
0 Posts
Man i am not sure (99ssblanco) made them for me.
thanks! it was alot of work. lol
12-13-2009, 08:31 PM
#15
Katech makes a nice kit too, but it's pretty pricey.
Teri has them installed on their "Yellin SS".
Check out this thread & scroll down a little bit to see pics....https://ls1tech.com/forums/appearanc...ress-pics.html
Shay
Teri has them installed on their "Yellin SS".
Check out this thread & scroll down a little bit to see pics....https://ls1tech.com/forums/appearanc...ress-pics.html
Shay
12-13-2009, 10:37 PM
#17
TECH Resident
iTrader: (16)
Join Date: Feb 2007
Location: Baytown, Tx
Posts: 802
Likes: 0
Received 0 Likes
on
0 Posts
To smooth the valve covers i had to first cut off the tabs where the coil brackets screwed on to. U can use a hack saw or grider. I used a metabo saw to cut it pretty close to being flush, then i grinded the rest smooth with the grinder.Then i filled the holes with jv weld, after that i sanded the valve covers with 80grt sand paper, cleaned with laquer thinner, and the sprayed three coats of automotive primer surfacer. Then i sanded with 600grt sand paper. Now you are ready to base coat and add grafix.
Last edited by Pheonix; 12-13-2009 at 10:43 PM.
