black_sheep454

iTrader: (9)

Any idea on a price?

dragonZ28

iTrader: (32)

$100.00 for both pieces together.
Shipping would cost you about $10.00 each way.
Please let me know.

Thanks, Roger

black_sheep454

iTrader: (9)

Thanks I'll let ya know when I'm ready, probably gonna shave the key hole first

crimson_bird

iTrader: (4)

haha. so the race begins. we'll see who can get it done first. that and the targa top.

at least you have the car ready that its all going on. i still have to sell 2 cars before i get the next car. but once one sells i'll be getting the rims.

Smithwick88

iTrader: (7)

Hey Roger, just wondering if you recieved any word on the solid colors or gloss film (post #343 page 18)?

dragonZ28

iTrader: (32)

In fact , I talked to them today, and there are no solid colors.
I Quote "A good quality painting, and clearing of the part would be best"
So that is the opinion of the experts.
Some shops charge a lot of money for this service. What it would cost would depend on how many pieces you had, and the size of them.

Thanks, Roger

Smithwick88

iTrader: (7)

I want to do most of the hard plastics in my car, If I went through emblempros would you do the paint or would you suggest getting them painted elsewhere and then send them to you? Also I never really got an answer about whether or not you could do the insides of my A/C vent rings (trans am). I just want to make sure because they are not on the price list, if you need an example I can send you a picture.

Goobdog

Could you do my rear end housing in the brushed aluminum ? How much ?

dragonZ28

iTrader: (32)

We can paint the parts here and coat them for you in any of the patterns we show. The vent rings insides? I am not clear on what you mean, but a picture my clear it all up for me. Do you mean the actual vent fins?

Thanks, Roger

dragonZ28

iTrader: (32)

Yes,

We can do it. It would be $50.00, plus the shipping back and forth.
The part needs to come very clean to us.
Please let me know

Thanks, Roger

ryonyanko

iTrader: (1)

And.. I was wondering if you guys got my email and any new pics on semi-gloss and matte finishes yet?

Smithwick88

iTrader: (7)

Not the vents themselves but the plastic cylinder they sit in, you can take them out of the dash and take out the vents.

dragonZ28

iTrader: (32)

The surfaces yes, Maybe not the insides.
The vents go there anyway, so yes on the outer surfaces.

Thanks, Roger

dragonZ28

iTrader: (32)

We actually have to buy the clear coat in those finishes at 170 dollars a gallon. Not counting the hardener, and reducer. Pretty high for pictures. What is likely to happen is we will sell a set like that, and then buy the clear for it, and post pictures up of that.

I thought I answered all emails, may want to resend. We have been having internet issues here for about two weeks.

Thanks, Roger

blackbyrd

iTrader: (14)

i also wanted to know about the vent rings, sounds like it wont work though the outer surface is hidden by the dash once they are installed all you would see is the inside of the cylider and then the actual vent themselves set back about 2 inchs in the cylinder.

this is the best pic i have (i would take more buy my car is getting the interior redone as we speak and its in another town)

dragonZ28

iTrader: (32)

I see what you're asking. We could cover what is exposed and keep the pattern looking good, but the trick here is the surface area across the hole stretches to the surface area inside of it while it is dipped, so complete coverage doesn't always work down into cylinders.

For example, if you had a cylinder with a 5" diameter and 2" depth, we could do it nearly perfectly. However, if it was a 3" diameter and you wanted 3" of coverage down the cylinder, it ain't happening.

Case in point, we do the fog light bezels on the 2010 Camaro with no problems at all, but we couldn't do the inside of a paint can.

vader99

iTrader: (4)

I am very interested in seeing some of the (brushed) metal pattern results on, for example, the upper shell of a fast intake.

blackbyrd

iTrader: (14)

i would think the 3 center ones are possible but the passenger side one is quite a bit larger and the one on the driver side doesnt come out it is attatced to the part that covers the gauges glass

dragonZ28

iTrader: (32)

Here are some patterns we've done this weekend and we did several colors underneath to show what the top layer will look like as a result.

(These pieces still need to be polished)

First off, here are some C6 and Viper parts done in black base coat with CF-621 on top:













CF-01-12 pattern





Orange




Red




Silver




Yellow

dragonZ28

iTrader: (32)

CF-00-22

Black




CF-621





Black




Red




CF-62-21





Red




Orange




Blue