Emblempros.com is now offering hydrocoating
#105
Thread Starter
FormerVendor
iTrader: (32)
Joined: Jul 2003
Posts: 3,654
Likes: 0
From: Lexington, KY
We have been searching for al potential patterns we will be using, and have found a fair quantity of patterns.
Lots of wood patterns, metal finishes, carbon fiber stuff, etc...
The stuff is not cheap, and we will begin stocking on January 1st. We will have posted on our site which patterns we will be starting with.
Thanks, Roger
Lots of wood patterns, metal finishes, carbon fiber stuff, etc...
The stuff is not cheap, and we will begin stocking on January 1st. We will have posted on our site which patterns we will be starting with.
Thanks, Roger
#108
Thread Starter
FormerVendor
iTrader: (32)
Joined: Jul 2003
Posts: 3,654
Likes: 0
From: Lexington, KY
I have a 2010 SS/RS. and I will be doing its engine cover, I think they will look extremely nice on top of the engine. It the first part on my car I will be doing.
Get your parts ready. We will be posting prices the first week in January. Only about two weeks from now.
Thanks again, Roger
Get your parts ready. We will be posting prices the first week in January. Only about two weeks from now.
Thanks again, Roger
#111
Holy Hell! I've been waiting for a sponsor to offer a service like this. I'll definitely be doing this to my upper console, once I successfully delete the cup holder. Here's a grand idea: YOU should become partners with 6LE and offer them a huge deal, so that 6LE can offer their products in those finishes. SUCH AS A CARBON FIBER SPLITTER THAT EVERYONE HAS BEEN WAITING FOR!!!!!!!!
#112
Thread Starter
FormerVendor
iTrader: (32)
Joined: Jul 2003
Posts: 3,654
Likes: 0
From: Lexington, KY
Holy Hell! I've been waiting for a sponsor to offer a service like this. I'll definitely be doing this to my upper console, once I successfully delete the cup holder. Here's a grand idea: YOU should become partners with 6LE and offer them a huge deal, so that 6LE can offer their products in those finishes. SUCH AS A CARBON FIBER SPLITTER THAT EVERYONE HAS BEEN WAITING FOR!!!!!!!!
Thanks, Roger
#113
Holy Hell! I've been waiting for a sponsor to offer a service like this. I'll definitely be doing this to my upper console, once I successfully delete the cup holder. Here's a grand idea: YOU should become partners with 6LE and offer them a huge deal, so that 6LE can offer their products in those finishes. SUCH AS A CARBON FIBER SPLITTER THAT EVERYONE HAS BEEN WAITING FOR!!!!!!!!
Anyways, an ABS one hydro-dipped in COUNTLESS themes could be cool as well
Part is about 68"x30"...
#114
Roger and Matt make the 6LE emblems for our 6LE package and are currently designing our 6LITEREATER shields to go with out wide bodies
#116
Thread Starter
FormerVendor
iTrader: (32)
Joined: Jul 2003
Posts: 3,654
Likes: 0
From: Lexington, KY
Well, we are here in a hotel getting ready to go to training that starts tomorrow morning. I am trying to write down all of my questions, and ideas today. Once we get back home, we have some electrical, and plumbing work to install everything, and we will be "in business" We have a paint booth thats 12 x 14 for the Clear coat.
A lot to do over the holidays.
A lot to do over the holidays.
#118
Thread Starter
FormerVendor
iTrader: (32)
Joined: Jul 2003
Posts: 3,654
Likes: 0
From: Lexington, KY
Okay guys, here are some parts that we did in training. If you see any imperfections it is because these parts have been used about a dozen times before to train other people.
Car blank with a tan base coat getting dipped in a camo pattern:
Console bezel and A/C control cluster all in one - from what I was told, most professionals cannot get this thing done around the top lip due to the motions you need to make to get complete coverage. I got it on my 1st shot
A door handle insert:
Here is a carbon fiber pattern that we used. It is not my favorite CF pattern they had, but it was good for training nonetheless:
Hooker shoe:
Here is my favorite carbon fiber weave (looks sick in person) - these parts were all in the conference room so I snagged some pics for you guys.
Up close:
Car blank with a tan base coat getting dipped in a camo pattern:
Console bezel and A/C control cluster all in one - from what I was told, most professionals cannot get this thing done around the top lip due to the motions you need to make to get complete coverage. I got it on my 1st shot
A door handle insert:
Here is a carbon fiber pattern that we used. It is not my favorite CF pattern they had, but it was good for training nonetheless:
Hooker shoe:
Here is my favorite carbon fiber weave (looks sick in person) - these parts were all in the conference room so I snagged some pics for you guys.
Up close:
Last edited by dragonZ28; 02-14-2010 at 05:01 PM.
#120
Just a question...I just watched a video on youtube showing how the dipping process was done, and it's pretty awesome.. But, what I was wondering was...could you guys do a vid that shows your set up and maybe you shops set up as well? Not that it really matters, just would like to see what your set up is like