! We actually had just sent test pieces off before I knew Matt and Roger were doing this. I'm sure we'll be sending stuff to them for anyone who wants it done...
Emblempros.com is now offering hydrocoating
Staging Lane
Joined: Jan 2009
Posts: 98
Likes: 0
From: Livermore,Ca
Thread Starter
FormerVendor
iTrader: (32)
Joined: Jul 2003
Posts: 3,654
Likes: 0
From: Lexington, KY
how about a whole body? i'm gonna get my entire car dipped in this ****......carbon fiber f-body FTW!!!!!!111!!!11!!1!!!!1
not really, but this will add some nice touches to the interior and under the hood. the vette guys have been doing this for a while. one guy had his entire wiper cowl dipped in this, looked really good.
not really, but this will add some nice touches to the interior and under the hood. the vette guys have been doing this for a while. one guy had his entire wiper cowl dipped in this, looked really good.
Not sure exactly on the dimensions, but this a large tank, and there are reasons we went this large.
Complete wheels, Large motorcycle parts, etc... We feel this will accomodate any requirements for large parts.
Thanks, Roger
Last edited by dragonZ28; Dec 15, 2009 at 06:39 AM.
couple of questions you may not be able to answer yet but here goes before i forget them.
can you do it in a stainless steel pattern?
can you apply a dull clear coat or semi gloss maybe??
and can it be done on vynil (lake the armrests on trans am's)
let me know when you know i am interested in this
can you do it in a stainless steel pattern?
can you apply a dull clear coat or semi gloss maybe??
and can it be done on vynil (lake the armrests on trans am's)
let me know when you know i am interested in this
Staging Lane
Joined: Apr 2008
Posts: 69
Likes: 0
From: Central Valley, Ca
I'm definately going to be spending some money on this... Maybe a fuel rail cover/lid combo... Just great... Hey can u guys do te Ss rear spoiler in a carbon fiber pattern? If so, how close will it look to the real carbon fiber pattern? I've seen some "carbon fiber" finishes and they look pretty shitty
Thread Starter
FormerVendor
iTrader: (32)
Joined: Jul 2003
Posts: 3,654
Likes: 0
From: Lexington, KY
couple of questions you may not be able to answer yet but here goes before i forget them.
can you do it in a stainless steel pattern?
can you apply a dull clear coat or semi gloss maybe??
and can it be done on vynil (lake the armrests on trans am's)
let me know when you know i am interested in this
can you do it in a stainless steel pattern?
can you apply a dull clear coat or semi gloss maybe??
and can it be done on vynil (lake the armrests on trans am's)
let me know when you know i am interested in this
2 - Yes, absolutely
3 - I wouldn't try that.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Thread Starter
FormerVendor
iTrader: (32)
Joined: Jul 2003
Posts: 3,654
Likes: 0
From: Lexington, KY
I'm definately going to be spending some money on this... Maybe a fuel rail cover/lid combo... Just great... Hey can u guys do te Ss rear spoiler in a carbon fiber pattern? If so, how close will it look to the real carbon fiber pattern? I've seen some "carbon fiber" finishes and they look pretty shitty
Thread Starter
FormerVendor
iTrader: (32)
Joined: Jul 2003
Posts: 3,654
Likes: 0
From: Lexington, KY
There are many different styles of the carbon fiber available at least 12 of them. However, all can be made to be different colors. There are also a lot of other patterns, and designs we are deciding on to start with. Anyone have any ideas besides the carbon fiber?
Thanks, Roger
Thanks, Roger
Rockstar
iTrader: (15)
Joined: Feb 2009
Posts: 1,582
Likes: 0
From: I'm on a boat! in Shreveport, La
There are many different styles of the carbon fiber available at least 12 of them. However, all can be made to be different colors. There are also a lot of other patterns, and designs we are deciding on to start with. Anyone have any ideas besides the carbon fiber?
Thanks, Roger
Thanks, Roger
There are many different styles of the carbon fiber available at least 12 of them. However, all can be made to be different colors. There are also a lot of other patterns, and designs we are deciding on to start with. Anyone have any ideas besides the carbon fiber?
Thanks, Roger
Thanks, Roger
it would be nice for the guys with the tan interiors
Thread Starter
FormerVendor
iTrader: (32)
Joined: Jul 2003
Posts: 3,654
Likes: 0
From: Lexington, KY