C6 shift knob
Teching In
Joined: Jun 2009
Posts: 32
Likes: 0
There is a website that you can order the ***** that are already fitted to fit the fbods. I ordered one about a month ago for around 100 bucks. I will look at my invoice tonight for the website.
Ok here is the website... hope this is what you guys were looking for...
http://www.gscreationsllc.com/produc...6a2f9d07759cd8
Also BEWARE! The C6 style shift **** will sit higher then the Hurst or SLP shifters... I believe this is due to the threading. So you may not like the look... check my pic out of the shifter on my bird. Pics are at the bottom.
https://ls1tech.com/forums/appearanc...t-dd-ever.html
Ok here is the website... hope this is what you guys were looking for...
http://www.gscreationsllc.com/produc...6a2f9d07759cd8
Also BEWARE! The C6 style shift **** will sit higher then the Hurst or SLP shifters... I believe this is due to the threading. So you may not like the look... check my pic out of the shifter on my bird. Pics are at the bottom.
https://ls1tech.com/forums/appearanc...t-dd-ever.html
Last edited by DoomSlayer; Mar 8, 2010 at 06:25 PM.
dont order from there its a rip off when i had my c6 **** order this one
http://www.corvetterecycling.com/pro...20100125-3.htm
the inside of the **** is hollow plastic so take you short stick put it in a vise grip to lock it and turn the **** on it will thread itself the c6 **** sits high because the stick wont go to the top of the **** i had my short stick cut in the middle with an 1"-1 1/2" taken out and welded back together heres how mine looked
http://www.corvetterecycling.com/pro...20100125-3.htm
the inside of the **** is hollow plastic so take you short stick put it in a vise grip to lock it and turn the **** on it will thread itself the c6 **** sits high because the stick wont go to the top of the **** i had my short stick cut in the middle with an 1"-1 1/2" taken out and welded back together heres how mine looked
Trending Topics
Shift ***** Have a look at the sweet ***** over on the MGW website.
www.mgwltd.com
I think if you call they may tap these to whatever size you need if they don't have it already.
www.mgwltd.com
I think if you call they may tap these to whatever size you need if they don't have it already.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Teching In
Joined: Jun 2009
Posts: 32
Likes: 0
Not to try and take GSCreations up or anything... Their item was as stated. I got the shifter in the mail and screwed it directly on. Price may have been a little high... but honestly I would rather pay a little more than have to screw with it.
I have the same GS Creations ****, it is works great just screw it on
Got the same one a couple years ago. Perfect fit
dont order from there its a rip off when i had my c6 **** order this one
http://www.corvetterecycling.com/pro...20100125-3.htm
the inside of the **** is hollow plastic so take you short stick put it in a vise grip to lock it and turn the **** on it will thread itself the c6 **** sits high because the stick wont go to the top of the **** i had my short stick cut in the middle with an 1"-1 1/2" taken out and welded back together heres how mine looked
http://www.corvetterecycling.com/pro...20100125-3.htm
the inside of the **** is hollow plastic so take you short stick put it in a vise grip to lock it and turn the **** on it will thread itself the c6 **** sits high because the stick wont go to the top of the **** i had my short stick cut in the middle with an 1"-1 1/2" taken out and welded back together heres how mine looked
Teching In
Joined: Jun 2009
Posts: 32
Likes: 0
i found mine on ebay brand new for 40 $ shipped. the reason the **** wont go on is cuz of the plastic tab half way in the shift ****... i just drilled that out and it worked perfect. i got the **** on all the way and the **** is at the perfect height that i want it at