1993-2002 F-BODY Gauge AND HVAC, Headlight, etc... Overlays GROUP PURCHASE 12!!!
05-11-2010, 01:41 AM
#124
05-11-2010, 12:37 PM
#128
On The Tree
iTrader: (2)
Join Date: Feb 2010
Location: West Michigan
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
), you can buy a ScanGauge II for about $150. It plugs into your OBD2 port under the dash, and will show accurate speed, RPM, water temp, and voltage. You're out of luck on the oil pressure and fuel, but those aren't hard to get close.After you get it all set back correctly, you can resell the SCII for at least $100 on eBay, so you're not out much.
05-11-2010, 09:25 PM
#134
TECH Fanatic
iTrader: (14)
Join Date: Mar 2007
Location: Phoenix/Tempe, AZ
Posts: 1,968
Likes: 0
Received 0 Likes
on
0 Posts
Like it's been stated, take pictures while the car is running on a flat surface. If you do screw them up (like I did ), you can buy a ScanGauge II for about $150. It plugs into your OBD2 port under the dash, and will show accurate speed, RPM, water temp, and voltage. You're out of luck on the oil pressure and fuel, but those aren't hard to get close.
After you get it all set back correctly, you can resell the SCII for at least $100 on eBay, so you're not out much.
), you can buy a ScanGauge II for about $150. It plugs into your OBD2 port under the dash, and will show accurate speed, RPM, water temp, and voltage. You're out of luck on the oil pressure and fuel, but those aren't hard to get close.After you get it all set back correctly, you can resell the SCII for at least $100 on eBay, so you're not out much.
just as soon as i get it all to work haha
05-12-2010, 06:15 AM
#137
If that ABS/SS bezel is still for sale next Friday I'll place my order right after I deposit my check on lunch. I was forced to miss the overlays due to things outside my control but I'd like to at least get one of these for my stock cluster & ditch my ebay crappy fitting aluminum overlay.
05-12-2010, 06:29 AM
#138
If that ABS/SS bezel is still for sale next Friday I'll place my order right after I deposit my check on lunch. I was forced to miss the overlays due to things outside my control but I'd like to at least get one of these for my stock cluster & ditch my ebay crappy fitting aluminum overlay.