1993-2002 F-BODY Gauge AND HVAC, Headlight, etc... Overlays GROUP PURCHASE 12!!!
04-14-2010, 03:56 AM
#1
1993-2002 F-BODY Gauge AND HVAC, Headlight, etc... Overlays GROUP PURCHASE 12!!! OFFICIAL LS1TECH GP THREAD HERE: https://ls1tech.com/forums/sponsor-g...l#post13185398
REPOST:
DISCLAIMER: I turned my PMs off so you HAVE to e-mail me. It gets way too damn confusing trying to remember what screen name belongs to what e-mail belongs to what real name, etc...
Two things before we get started though:
1) READ THE POST IN FULL AND READ THE ORDERING PAGE IN FULL. If you ask a question that doesn't get a response in 24 hours it is probably because it is something blatantly written and I'm not repeating it 100xs. I know it is confusing and long and I will walk you through whatever but I'm tired of the "I know it is probably already written but I don't want to read all that..." e-mails.
2) Due again to confusion, ORDER FIRST. The answer pretty much EVERY TIME to, "Can you..." will be, "YES." so don't worry. Order first then we'll sort out making sure you paid enough, didn't pay too much, we know exactly what you want, etc... So many times we go back and forth with people and even do some artwork FOR WEEKS and then they change their mind, go over the deadline, etc... Just PLACE YOUR ORDER to the best of your ability, we'll go over it all with you AND SINCE YOU ALREADY PLACE IT, we'll just make the artwork so that you'll get to see it BEFORE the deadline and be able to approve it (we've always been lenient as well and allowed some changes but if you start flip flopping like John Kerry you'll either take the last rendition or get a slight charge)....
Alrighty, enough of the venting (trust me, after 11 of these I want to pull my hair out sometimes but I paid too much for it so I just have to vent here, lol...)... ON TO THE GROUP PURCHASE!!!
It is FINALLY that time again
If you want the coolest most customizable overlays for your F-Body look no further!
Multiple colors, add whatever words/symbols you want...
We even make 200mph overlays AND have a place for you to get them calibrated now...
Of course we have ALL of your interior overlays covered and get pretty custom (check out the chick on the HVAC controls)...
All the info you need is right here (Gauge Overlays, Other Overlays, Color Options and Re-Calibration)...
http://6litereaterdesigns.com/store/...cPath=21_37_74
These are still done in a Group Purchase format and the end of this Group Purchase 5/16/10 at midnight. You have until then to place your order.
If you have any questions BEFORE you place your order about what we can and can not do please e-mail me at madelisle@yahoo.com
That is also the e-mail address to send a jpg file AFTER you order if you are having something custom added to the overlays.
Most of you know what these are but for those who don't check the above link, do a search here on LS1tech for installed overlays or go here to my mega thread...
http://6litereaterdesigns.com/forum/...hp?topic=532.0
TO CLARIFY, WE MAKE THESE FOR ALL 1993-2002 F-BODIES!!! Whether you are a V6, a 1993, a car that needs it to read KM/H, whatever, WE MAKE THESE FOR YOUR CAR AND ALL THE OPTIONS (pretty much) APPLY TO EVERYONE!!!
Here's some recent pics of Sommer86's very custom set...
Once again, THESE OVERLAYS ARE FOR ANY 1993-2002 F-BODY!!! We have the proper files to send you the design for your car, don't worry (you won't believe how many people don't get that concept because the majority of my pics are 1998+).
McNord's latest designs (a new choice, you can still go with the old ones) look GREAT! He came out with two new options (a gradient shadow, no extra charge, and customized numbers/script that "pop" $20 charge)...
THIS JUST IN, WE HAVE ANOTHER NEW OPTION, TURNED METAL!!!!
We are also VERY HAPPY to announce the release of our S86 Needles... Custom needles, ANY COLOR, for your F-Body. Seen here are our white needles on a 200mph overlay for Edelbrock's Dick Harrell car...
To learn more about our needles, go here...
http://6litereaterdesigns.com/store/...roducts_id=187
Again, ALL OF THE INFORMATION ABOUT ORDERING, COST, OPTIONS, ETC... IS HERE:
http://6litereaterdesigns.com/store/...cPath=21_37_74
There are countless other AWESOME looking gauge overlays that have been posted on here (just do a search for 6LE overlay or McNord overlay).
Alrighty, you wanted something to spend your tax refunds on, I'm giving you another one, I did my part now send us some money
REPOST:
DISCLAIMER: I turned my PMs off so you HAVE to e-mail me. It gets way too damn confusing trying to remember what screen name belongs to what e-mail belongs to what real name, etc...
Two things before we get started though:
1) READ THE POST IN FULL AND READ THE ORDERING PAGE IN FULL. If you ask a question that doesn't get a response in 24 hours it is probably because it is something blatantly written and I'm not repeating it 100xs. I know it is confusing and long and I will walk you through whatever but I'm tired of the "I know it is probably already written but I don't want to read all that..." e-mails.
2) Due again to confusion, ORDER FIRST. The answer pretty much EVERY TIME to, "Can you..." will be, "YES." so don't worry. Order first then we'll sort out making sure you paid enough, didn't pay too much, we know exactly what you want, etc... So many times we go back and forth with people and even do some artwork FOR WEEKS and then they change their mind, go over the deadline, etc... Just PLACE YOUR ORDER to the best of your ability, we'll go over it all with you AND SINCE YOU ALREADY PLACE IT, we'll just make the artwork so that you'll get to see it BEFORE the deadline and be able to approve it (we've always been lenient as well and allowed some changes but if you start flip flopping like John Kerry you'll either take the last rendition or get a slight charge)....
Alrighty, enough of the venting (trust me, after 11 of these I want to pull my hair out sometimes but I paid too much for it so I just have to vent here, lol...)... ON TO THE GROUP PURCHASE!!!
It is FINALLY that time again
If you want the coolest most customizable overlays for your F-Body look no further! Multiple colors, add whatever words/symbols you want...
We even make 200mph overlays AND have a place for you to get them calibrated now...
Of course we have ALL of your interior overlays covered and get pretty custom (check out the chick on the HVAC controls)...
All the info you need is right here (Gauge Overlays, Other Overlays, Color Options and Re-Calibration)...
http://6litereaterdesigns.com/store/...cPath=21_37_74
These are still done in a Group Purchase format and the end of this Group Purchase 5/16/10 at midnight. You have until then to place your order.
If you have any questions BEFORE you place your order about what we can and can not do please e-mail me at madelisle@yahoo.com
That is also the e-mail address to send a jpg file AFTER you order if you are having something custom added to the overlays.
Most of you know what these are but for those who don't check the above link, do a search here on LS1tech for installed overlays or go here to my mega thread...
http://6litereaterdesigns.com/forum/...hp?topic=532.0
TO CLARIFY, WE MAKE THESE FOR ALL 1993-2002 F-BODIES!!! Whether you are a V6, a 1993, a car that needs it to read KM/H, whatever, WE MAKE THESE FOR YOUR CAR AND ALL THE OPTIONS (pretty much) APPLY TO EVERYONE!!!
Here's some recent pics of Sommer86's very custom set...
Once again, THESE OVERLAYS ARE FOR ANY 1993-2002 F-BODY!!! We have the proper files to send you the design for your car, don't worry (you won't believe how many people don't get that concept because the majority of my pics are 1998+).
McNord's latest designs (a new choice, you can still go with the old ones) look GREAT! He came out with two new options (a gradient shadow, no extra charge, and customized numbers/script that "pop" $20 charge)...
THIS JUST IN, WE HAVE ANOTHER NEW OPTION, TURNED METAL!!!!
We are also VERY HAPPY to announce the release of our S86 Needles... Custom needles, ANY COLOR, for your F-Body. Seen here are our white needles on a 200mph overlay for Edelbrock's Dick Harrell car...
To learn more about our needles, go here...
http://6litereaterdesigns.com/store/...roducts_id=187
Again, ALL OF THE INFORMATION ABOUT ORDERING, COST, OPTIONS, ETC... IS HERE:
http://6litereaterdesigns.com/store/...cPath=21_37_74
There are countless other AWESOME looking gauge overlays that have been posted on here (just do a search for 6LE overlay or McNord overlay).
Alrighty, you wanted something to spend your tax refunds on, I'm giving you another one, I did my part now send us some money
04-14-2010, 03:56 AM
#3
Here's a new overlay McNord just made for his own car...
Awesomeness
More pics to get the creative juices flowing...
The first one shows the HVAC and also a matching face for an Auto Meter tach..
Just click the option "CUSTOM BACKGROUND ARTWORK" and for $50 we'll go crazy
Awesomeness
More pics to get the creative juices flowing...
The first one shows the HVAC and also a matching face for an Auto Meter tach..
Just click the option "CUSTOM BACKGROUND ARTWORK" and for $50 we'll go crazy
04-14-2010, 07:04 AM
#5
AWSOME, with this deadline I should be able to get in on this one. Or at least I'm hopin so b/c if these disappear & I dont get a set I'm gonna kick my own *** later.
These are the absolute BEST overlays on the market from any manufacture IMO and I dont even own a set yet. I'm just basing my opinion off what I have seen, available custom options & previous customer feedback.
These are the absolute BEST overlays on the market from any manufacture IMO and I dont even own a set yet. I'm just basing my opinion off what I have seen, available custom options & previous customer feedback.
Trending Topics
04-14-2010, 10:16 AM
#8
TECH Apprentice
iTrader: (8)
Join Date: Jun 2009
Location: Plano, TX
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the PM Mark. I will definately be in this one. I will do research when I get home and see what I want. BUT FIRST ... I will place my order ASAP and then we can work it out LOL ....
04-14-2010, 10:57 AM
#10
Question Mark, I was tryin to use the shoppin cart to get a ballpark on price for everything I wanted but when choosing overlay color Gray was my only choice yet Silve was mentioned in the pics but not the drop down menu. Is silver & not Gray still a option?
04-14-2010, 12:34 PM
#11
TECH Addict
iTrader: (6)
Join Date: May 2007
Location: Odessa, TX
Posts: 2,243
Likes: 0
Received 0 Likes
on
0 Posts
Ill be in this, be looking at pics after work to see what i can come up with for a custom design. If not, maybe ill just go with the checkered design as i had planned 1st.
04-14-2010, 08:52 PM
#18
When you order, just click grey and put in the note (or an e-mail later) to get it as light (close to silver) as possible and we will...
Basically, we don't call it silver because silver normally has metal flake which we can NOT do... We can just do light grey...
