View Poll Results: What do you think?
No!!!!!
30
65.22%
looks Great!!!!
8
17.39%
looks okay but keep it stock....
8
17.39%
Voters: 46. You may not vote on this poll
Thinking about doing fixed headlights on the Hawk.
#21
#23
#27
I agree with thunderstruck . ....flip up headlights are lame as hell IMO, best thing about the c6 Corvette was losing those..
Really would like a set for the TA
I'll help anyone working on a kit to eliminate the flip up.
Really would like a set for the TA
I'll help anyone working on a kit to eliminate the flip up.
#28
nice lt1 camaro. Keep the flip ups, looks so much better. if you ever get the tingling to upgrade the lighting performance, the BLS conversion kicks the **** out of the fixed-lights' projectors
#32
For those looking for a nice inexpensive HID bi-zenon projector, I'm gonna recommend these units.
http://forums.tccoa.com/showthread.php?t=125199
I bought a set several months ago and installed them in my Thunderbird housings and they've worked great, great beam pattern and small physical deminsions. I think I paid $130 for the pair with ballasts. The ones on my car are not sealed in the far rear, but I've had no moisture problems at all.
http://forums.tccoa.com/showthread.php?t=125199
I bought a set several months ago and installed them in my Thunderbird housings and they've worked great, great beam pattern and small physical deminsions. I think I paid $130 for the pair with ballasts. The ones on my car are not sealed in the far rear, but I've had no moisture problems at all.
#33
Concerning the Trans Am, I've been planning on building some fixed headlights using projector lenses. Now I'm thinking of moving the projectors down to the turn signal locations.
I know there are headlight height laws here in TX and that this new location is lower than the law allows. Do you think I'd be able to pass the annual inspection?
I know there are headlight height laws here in TX and that this new location is lower than the law allows. Do you think I'd be able to pass the annual inspection?
#36
I think they look Great!
For the guys questioning of how to make these or interested in offering to buy a kit.
would it be really tough to take out the flip out headlight with the bucket, use modelling clay and have a rough shape.
With that rough sample, work with fiberglass or take it to a connect thats a fiberglass expert? I'm sure a c6 type fixed headlight isn't too hard.
For the guys questioning of how to make these or interested in offering to buy a kit.
would it be really tough to take out the flip out headlight with the bucket, use modelling clay and have a rough shape.
With that rough sample, work with fiberglass or take it to a connect thats a fiberglass expert? I'm sure a c6 type fixed headlight isn't too hard.