Hlaalu's headlights ** 99.9% completed **
#22
On The Tree
Join Date: May 2010
Location: UP YORN, AL
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
#23
#25
TECH Addict
Thread Starter
iTrader: (3)
Join Date: Oct 2007
Location: Orange County
Posts: 2,543
Likes: 0
Received 0 Likes
on
0 Posts
I was about ready to scrap this project when the only halo rings I could find were from china. Then, I found some
Computer fans with CCFL rings If they don't fit I'll just toss them in my comp, they were only $5.50 a piece, I bought two of them.
Specs:
* Diameter of Round cold cathode:8cm
* Input voltage:12V
* Output voltage:620V
* Power compsumption:2.4watts
* Current draw:0.005A
* Brightness:28,000 cd/m?
And I also bought
Slim HID kit 6000k
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWNX%3AIT
I made a best offer of $40 and got it (should have tried lower first lol)
Computer fans with CCFL rings If they don't fit I'll just toss them in my comp, they were only $5.50 a piece, I bought two of them.
Specs:
* Diameter of Round cold cathode:8cm
* Input voltage:12V
* Output voltage:620V
* Power compsumption:2.4watts
* Current draw:0.005A
* Brightness:28,000 cd/m?
And I also bought
Slim HID kit 6000k
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWNX%3AIT
I made a best offer of $40 and got it (should have tried lower first lol)
#29
On The Tree
Join Date: May 2010
Location: UP YORN, AL
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
#30
TECH Addict
Thread Starter
iTrader: (3)
Join Date: Oct 2007
Location: Orange County
Posts: 2,543
Likes: 0
Received 0 Likes
on
0 Posts
Yeah i saw those, couldn't find red ones. I sort of eyeballed/measured the rings through the lens and pretty sure they are 80mm. When my rings come, if it looks like they won't even fit I don't know if I'll even bother to take the lights apart.
Now as far as the halo rings, they have a plastic case with tabs so I need to grind down the 4 tabs on each of the rings.
So halo rings should be here monday/tuesday, the HIDs will be here tomorrow or monday.
Now as far as the halo rings, they have a plastic case with tabs so I need to grind down the 4 tabs on each of the rings.
So halo rings should be here monday/tuesday, the HIDs will be here tomorrow or monday.
#32
TECH Senior Member
iTrader: (11)
Or what I did was pull the pins from the factory plugs and switch them around, that way the locking tab still lines up. And since halogen bulbs don't care about polarity, even if you went back to them it wouldn't affect those.
#33
TECH Addict
Thread Starter
iTrader: (3)
Join Date: Oct 2007
Location: Orange County
Posts: 2,543
Likes: 0
Received 0 Likes
on
0 Posts
You have to plug the ballast into the factory harness "backwards" because GM in their wisdom wired our cars backwards
Or what I did was pull the pins from the factory plugs and switch them around, that way the locking tab still lines up. And since halogen bulbs don't care about polarity, even if you went back to them it wouldn't affect those.
Or what I did was pull the pins from the factory plugs and switch them around, that way the locking tab still lines up. And since halogen bulbs don't care about polarity, even if you went back to them it wouldn't affect those.
#34
Staging Lane
iTrader: (10)
Join Date: Mar 2008
Location: Las Vegas
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
The Super Slim Hids are cool man i have them in my car, from the same seller. You gotta bring the car around to 1 of the meets after your done installing everything. I want to see how they look through the projectors compared through the stockers.