tmdz28

iTrader: (2)

I received my DDM HID kit, bought the 35W 6000k 9006 bulbs for my lows. Tried to install it today, none of the light would light up. I have swapped the left to right and right to left, no luck.

Reinstall my stock bulbs, it lights up like a champ!

Any suggestions?

Charlay

iTrader: (8)

https://ls1tech.com/forums/appearanc...g-hid-kit.html

https://ls1tech.com/forums/appearanc...g-hid-kit.html





https://ls1tech.com/forums/appearanc...-trans-am.html


Sorry not trying to be a jerk or anything .. just in a rush and wanted to help you out. I have those saved and one of them talks about flipping the connector upside down because GM has it reversed. Have you tried that? Hook it up right? just thoughts before I head out.

Badguy7

iTrader: (6)

Well what all did you buy? Did you get the "dual in/dual out" harness? If not, you need it to run the lows.

Did you hook it up properly?

99_ls1_z28

iTrader: (8)

^ what he said. Flip the connectors...

tmdz28

iTrader: (2)

NICE!! it works!!

But, there are flickers and what do you guys do to keep the connectors tight? Since my my pass. side sometimes does not turn on until i re-plug it and it works great. Time to buy the dual in/ dual out harness?

9WhiteCamaro9

^ yeah idk why GM had to be so complecated and turn something upside down instead of making the damn thing like its suppose to lol

JetBlack98Z

iTrader: (9)

Its flickering cause you don't have enough power running through the stock headlight harness, you need to run a relay system from your battery to energize them enough.

ssjason232

iTrader: (14)

to make them work with the connector, disassemble the plug using a paper clip. pull out the wires, and flip the connector. reinstall the wires back in with the plug "upside down", and it will plug right back in.

thats what i did with mine.