Powder coated 10 spoke SS wheels
#25
Got some new black lug nuts and got my calipers, brackets, and rotor hats powder coated black. Made a pretty big difference IMO. Gotta thank mitchntx for his writeup on rebuilding calipers, especially since I've always been told to just replace calipers. I ordered a few rebuild kits and taking them apart before powder coating and assembling them after powder coating was pretty easy with some of the suggestions he mentioned.
Got my ride height where I want it also. 1" spacers under the rear springs, front springs on the Koni lower spring perch. Ride height is about 26.75 on the rears and about 26.25 on the fronts .
Thanks guys for the help and comments. Now that I've got it handling, braking, and looking pretty darn good, I can start thinking about engine mods.
Got my ride height where I want it also. 1" spacers under the rear springs, front springs on the Koni lower spring perch. Ride height is about 26.75 on the rears and about 26.25 on the fronts .
Thanks guys for the help and comments. Now that I've got it handling, braking, and looking pretty darn good, I can start thinking about engine mods.
#27
Thanks man. I had them powder coated. I was wavering between painting them myself and paying someone to powder coat them and just decided to go ahead with the powder coating.