Project OVRKILL: The BLING Phase!!!
project Overkill WOW! You are a master at your craft, I envy guys that have the tools, time & talent to create this kind of car. Now get that bad boy on the 1320 & Race it like you stole it! 
rive:
rive: 
question Hi, sent PM but couldn't post pic to accompany question. What is that protruding from valve cover to catch can? I need one for my motor to reduce oil fumes emitting from breather. Thanks.
Cleaned up the void where the AC dryer lines used to be. Unlike some that deleted their AC the "correct" way, I improvised a little with a donor block and skilz of a local machinist.
On The Tree
Joined: Mar 2010
Posts: 112
Likes: 0
From: Tacoma, WA
Every time I look at this thread, I think the car couldn't get any more purrrrrty... but then you go and just add something else... dose valve covers doe!!!! 
Is this hog gonna make it to GM Nats? Looking to see this masterpiece in person finally!
Is this hog gonna make it to GM Nats? Looking to see this masterpiece in person finally!
Thanks man.....yes, this hog is planning on being there.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Actually less than before, but yes.....it's complicated.
Well seeing how GM High Tech and Camaro Performers are no more....that would be fine
Well seeing how GM High Tech and Camaro Performers are no more....that would be fine
Wow...almost two months since my last confessional. Must be running out of crap to do 
Like every other sail panel suffering from GM's adhesive change way back when, I finally boned up for the fix. Found an unbelievable deal locally on a NIB 6LE piece. Cant wait to get this thing on!
Like every other sail panel suffering from GM's adhesive change way back when, I finally boned up for the fix. Found an unbelievable deal locally on a NIB 6LE piece. Cant wait to get this thing on!
Just check the sail panel to make sure it's one of the later, better ones. They had an early run that the mold maker sent out that had a slight warp to them and some aremt "flat/level" on the top portion.
These newer ones he's doing with the new company are perfect pieces and fit amazing. Well, they all fit amazingly, just that the earlier ones had some imperfections and the molding/shipping company didn't inspect them to Mark's or Gil's standards before shipping.
Just a heads up. But I'm sure you've don't your due diligence, B!
These newer ones he's doing with the new company are perfect pieces and fit amazing. Well, they all fit amazingly, just that the earlier ones had some imperfections and the molding/shipping company didn't inspect them to Mark's or Gil's standards before shipping.
Just a heads up. But I'm sure you've don't your due diligence, B!
Just check the sail panel to make sure it's one of the later, better ones. They had an early run that the mold maker sent out that had a slight warp to them and some aremt "flat/level" on the top portion.
These newer ones he's doing with the new company are perfect pieces and fit amazing. Well, they all fit amazingly, just that the earlier ones had some imperfections and the molding/shipping company didn't inspect them to Mark's or Gil's standards before shipping.
Just a heads up. But I'm sure you've don't your due diligence, B!
These newer ones he's doing with the new company are perfect pieces and fit amazing. Well, they all fit amazingly, just that the earlier ones had some imperfections and the molding/shipping company didn't inspect them to Mark's or Gil's standards before shipping.
Just a heads up. But I'm sure you've don't your due diligence, B!
I had the pleasure of meeting Brent and seeing this car in person last month and the car is beautiful! My wife who hates F-body's now even agreed with me. If anyone has a chance to see it in person at a car show don't hesitate as Brent is great!
Thanks brother, means a lot coming from THE critique.....and your opinion has some weight too, lol. Really appreciated you guys taking the time out to stop by on your visit.
