Who is going to step up to the plate and MAKE THIS FINALLY
#22
Besides YOUR custom gauges in my car, were I to list everything aftermarket that I've purchased for my car (not everything go, a LOT show as well) it would take up half a page here on Tech
Since 6LE is not interested, any other Sponsors? DragonZ?
#23
^^no no no. Definitely not directed at you or anyone in particular at all to be honest.
To clarify, what are we talking about here, T-top or Hardtop?
T-top I could actually easily make as I realize now my tabs are broken and it stays on with the screws anyways, lol...
Hardtop not so much. It HAS to have all that crazy inside stuff...
Also, the defroster vents would not be perfect but would be close...
To clarify, what are we talking about here, T-top or Hardtop?
T-top I could actually easily make as I realize now my tabs are broken and it stays on with the screws anyways, lol...
Hardtop not so much. It HAS to have all that crazy inside stuff...
Also, the defroster vents would not be perfect but would be close...
#28
You guys do know that speedhut makes both a 2 and 3 pod full pillar pod for t-top cars.
3 pod.
http://cgi.ebay.com/ebaymotors/Speed...ht_1124wt_1167
https://ls1tech.com/forums/attachmen...10113-1740.jpg
2 pod.
http://cgi.ebay.com/ebaymotors/Speed...ht_1116wt_1167
3 pod.
http://cgi.ebay.com/ebaymotors/Speed...ht_1124wt_1167
https://ls1tech.com/forums/attachmen...10113-1740.jpg
2 pod.
http://cgi.ebay.com/ebaymotors/Speed...ht_1116wt_1167
#29
You guys do know that speedhut makes both a 2 and 3 pod full pillar pod for t-top cars.
3 pod.
http://cgi.ebay.com/ebaymotors/Speed...ht_1124wt_1167
https://ls1tech.com/forums/attachmen...10113-1740.jpg
2 pod.
http://cgi.ebay.com/ebaymotors/Speed...ht_1116wt_1167
3 pod.
http://cgi.ebay.com/ebaymotors/Speed...ht_1124wt_1167
https://ls1tech.com/forums/attachmen...10113-1740.jpg
2 pod.
http://cgi.ebay.com/ebaymotors/Speed...ht_1116wt_1167
#30
that's not what everyone in this thread is wanting.. what we want is to completely remove the existing pillar pod and replace it with one that has the holes molded in.. so you take the existing one off by undoing the screw at the top near the t-top, and pop it out of place all the way up under the windshield, and put the new one on the same exact way. No gay rivets or gluing or any of that ****.. a COMPLETE REPLACEMENT
CORRECT! this is for my IROC but you get the idea.....1 complete molded piece with the pods already molded in.....not the riveted pieces added on
ALSO!...KEEPING THE BOTTOM POD OFF THE DAMN DASHPAD ABOUT AN INCH OR SO....like mine!
#32
I have always said if someone made a triple pod that was a bolt-in they would have the F-body market cornered. As far as the speedhut it will need a ton of work to make it look like most people want for their car. I know, my unit is an old speedhut, which is an Autometer. My Triple has a ton of custom work along with being covered in black alcantara. It is exactly what I wanted, but it cost a small fortune and a ton of work to produce the end result.
PS: 6LE, you can still order the defrost vents from GM last time I checked. All you would need to do is make sure the hole is the right size with a slit at the top to match the defrost vent insert.
PS: 6LE, you can still order the defrost vents from GM last time I checked. All you would need to do is make sure the hole is the right size with a slit at the top to match the defrost vent insert.
Last edited by 96silverram; 04-09-2011 at 11:06 AM.
#33
Making.
Bringing to production.
Advertising,and promoting the product...
People wanna see it/how it looks on or in the vehicle...Others idea's aren't gonna get you paid if it isn't in production
#36
The pillar is a little more bulky, but I've got some good ideas how a copy of this could easily be reduced to the thickness of the OEM A-pillar. After going through this process I'm quite sure I could create something that would be closer to an OEM result. My pillar came out great and fits perfect, but I learned a lot in the process.
#38
Closed ex-Sponsor Account
iTrader: (3)
Joined: Nov 2008
Posts: 720
Likes: 0
From: Dickeyville Wisconsin
We can easily make these for everyone
We are making them now for the C5 and C6 Corvette
We make them by hand to order
we use a vinyl resin based paint miced for us for color, we can have them finishe din hydro carbon vinyl or leather as well
we can even make them with tweeter pods as well
Some pics of the C5 and C6 we have done
Send me message if you would like more info
Dennis
We are making them now for the C5 and C6 Corvette
We make them by hand to order
we use a vinyl resin based paint miced for us for color, we can have them finishe din hydro carbon vinyl or leather as well
we can even make them with tweeter pods as well
Some pics of the C5 and C6 we have done
Send me message if you would like more info
Dennis
Last edited by DOUBLEDMODS; 04-09-2011 at 03:36 PM.
#40
We can easily make these for everyone
We are making them now for the C5 and C6 Corvette
We make them by hand to order
we use a vinyl resin based paint miced for us for color, we can have them finishe din hydro carbon vinyl or leather as well
we can even make them with tweeter pods as well
Some pics of the C5 and C6 we have done
Send me message if you would like more info
Dennis
We are making them now for the C5 and C6 Corvette
We make them by hand to order
we use a vinyl resin based paint miced for us for color, we can have them finishe din hydro carbon vinyl or leather as well
we can even make them with tweeter pods as well
Some pics of the C5 and C6 we have done
Send me message if you would like more info
Dennis
Pm sent