How did they hide this harness? PICS INSIDE
Thread Starter
TECH Enthusiast
iTrader: (9)
Joined: Jan 2009
Posts: 712
Likes: 2
From: Winter Garden, FL
How did they hide this harness? PICS INSIDE How did they hide the wiring harness? I don't see connectors to the injectors or the coil packs.
Stock:
After:
By the way does anyone know what kind of fuel rail that is? Its beautiful.
Stock:
After:
By the way does anyone know what kind of fuel rail that is? Its beautiful.
the harness is under the intake cap, it has fillers on the edges where it makes contact with the heads... then they run it down the back and tuck it up under the firewall.. that is one of the besst examples i have seen.. that is one dope *** wire tuck...
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
I think your first reply nailed it. It has a carbon fiber look cover over the actual intake and all the wiring is under that cover. It's likely they separated the wiring for the coil packs and the injectors. The wiring for the coil packs are probably under the coil pack brackets while the injector wiring is under the cover. Not hard to do, just time consuming to remove the wire loom and pick out the appropriate wires and separate them.
If you look closely, you can see the wiring for the throttle body coming out from under the intake cover.
If you look closely, you can see the wiring for the throttle body coming out from under the intake cover.
