Stance thread ***DON'T QUOTE PICS!!!***
04-04-2013, 07:54 PM
#821
Launching!
Join Date: Nov 2008
Location: Far north in the Atlantic Ocean
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
Cleaned up the Z after winter storage and thought I'd snap one.
Koni 4/4's, Strano springs and BMR 1" lowering a-arms, hose mod out back. I put a few thousand miles on this setup last year and loved every minute of it. The car is pretty low, but thankfully my long tubes have awesome ground clearance and don't scrape on anything. I haven't taken any decent pics of it with the current stance, I'll post better pics soon.
Koni 4/4's, Strano springs and BMR 1" lowering a-arms, hose mod out back. I put a few thousand miles on this setup last year and loved every minute of it. The car is pretty low, but thankfully my long tubes have awesome ground clearance and don't scrape on anything. I haven't taken any decent pics of it with the current stance, I'll post better pics soon.
04-06-2013, 11:57 AM
#826
Launching!
Join Date: Nov 2008
Location: Far north in the Atlantic Ocean
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
I had the camera with me yesterday, shitty looking day though.
I can't fit a finger between the front tire and fender. Out back I can fit two fingers, so it has a slight rake, but that's exactly how I want it to be.
At the time, I didn't mind the stock ride height.
I can't fit a finger between the front tire and fender. Out back I can fit two fingers, so it has a slight rake, but that's exactly how I want it to be.
At the time, I didn't mind the stock ride height.
04-07-2013, 02:24 PM
#830
11 Second Club
Heres some with 17s and some with the new 15s.Springs are on perches so can raise and lower.the 17 pics the car is slammed and haven't droppped all the way with 15s yet (can go another3/4in)playing around with some stuff on rear and keeps from scraping turndowns on crowns in road.(tires run in valley and high in middle where exhaust is /michigan roads) 
04-07-2013, 03:15 PM
#831
I installed some Koni shocks, struts and Eibach Sportline springs on my '91 Trans Am GTA last weekend. I cut a quarter of the coils off of the fronts and a half coil from the rears. I really thought the car would have less tire to fender gap than this, but I'm actually ok with the way it sits now. When I have my custom GTA wheels made in sizes 19 x 9 and 19 x 11, I'll reassess my ride height and then go from there.
04-08-2013, 08:22 AM
#832
On The Tree
iTrader: (1)
Join Date: May 2011
Location: Sarasota FL
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
I installed some Koni shocks, struts and Eibach Sportline springs on my '91 Trans Am GTA last weekend. I cut a quarter of the coils off of the fronts and a half coil from the rears. I really thought the car would have less tire to fender gap than this, but I'm actually ok with the way it sits now. When I have my custom GTA wheels made in sizes 19 x 9 and 19 x 11, I'll reassess my ride height and then go from there.
04-09-2013, 04:54 PM
#840
You can get a manual valve setup with 4 switches for 1600$. I opted for something a little nicer with electric valves and autopilot v2 which has presets, gauges, rise on start all in a small controller.