My Trans Am HID install..
Yeh, I have HID's in my fog lights, I updated the housings and was going to make some brackets to mount projectors in there, but I don't think the light output with the cutoff would work well, so I just angled my fog lights to light the ground directly in front of the car, so I wasn't blinding anyone.
The HID's and halogens look stupid together, I hated it. It really makes your halogens look yellow..
The HID's and halogens look stupid together, I hated it. It really makes your halogens look yellow..
I used the Blazertech 3200's, I dunno if they made anymore. I just aimed them so as to not blind folks.
ah, ok. well, I guess I may have to bite the bullet then. I REALLY have been wanting the color of 55w 6000ks. My 35w's are a little bluer than what I want and 5000k bulbs were too stock looking. I'd probably get bashed if I called them yellow, but compared to the 6000's they almost are lol. Nice job though, Id so do this if I had a bird
great idea and good work...i was looking a while back to see if anyone made these for our birds. you could prob sell them here.
an idea i think would be cool is if the bracket matched the color of the vehicle. black is good but imagine yours in white or mine in green. i think it would be cleaner and have that "from the factory" look.
an idea i think would be cool is if the bracket matched the color of the vehicle. black is good but imagine yours in white or mine in green. i think it would be cleaner and have that "from the factory" look.
wahh. lol you need to put projectors on your brights as well, like you photoshoped below. 
autoluminationdotcom vledsdotcom and even ebay has some good ones. along with a few others. but get them from here
http://shop.jwmotoring.com/product.sc?productId=139
supposedly they have never had a pair returned and they have lifetime warranty! and to top that, they are $45 which is 10-15 cheaper than every1 else. when installing LED's tho, you have to replace your thermal flasher with a zero-load one. or use load resistors. which splice into your wires. i ordered 2(one for turn signals one for hazard lights) flasher modules for $30 shipped. these seem to be the best http://www.keepitcleanwiring.com/cat...shers/FF552NLF
that looks wicked. now paint to match, and throw some switchbacks in the mix, and you have yourself an A-Z badd *** set up.
I might paint them, just to see how they look. I'm digging the blackness of the holes, but can see where the white would look good.. Maybe I'll throw some paint on there..
I do need to snag some switchbacks, I'll check out your link. Thanks.
I do need to snag some switchbacks, I'll check out your link. Thanks.