SparkyJJO

iTrader: (11)

The flasher and cruise have nothing to do with each other.

Smokin00WS6

iTrader: (4)

I have to agree with 00WS6...No solid answers anywhere on the boards of recent (past year or two) of anyone giving specific info on what works and what doesn't. Ive been on superbrightleds.com website looking for flashers and cant narrow it down to what would work and what wouldn't.

00WS6nSC

iTrader: (1)

So i Need EF552 to make my taillights work correctly with full LEDs? I just tried the Keep it Clean flasher I had and the lights don't blink and the dash just lights up the turn signal flashers with no flashing. Just constant green light. Thanks for any help! Also does cruise still work?

MasterV8

iTrader: (7)

That's what I have, 2 for both signals & hazards. I have full leds in every location but headlights and so far they've worked fine and retain the tick.

Did you wire the grounds on these? I've used these with the headlights on too and no problems, I also have Triton T3s all round which come with their own controllers which may/may not make a difference.

00WS6nSC

iTrader: (1)

The Keep It Clean flashers I have do not have a grounding wire. For now I have all LEDS except for the middle taillights. There stock incandescents.

Y2KFirehawk

iTrader: (12)

Years later finally got off my butt and installed these along with fully converting tail lights to LEDs. Shopping to swap front DRLs to LED now to complete the install. Flashers work perfectly.

sjsingle1

iTrader: (1)

the specs on the EF552 say its not LED compatible ....but if it works it works

i had the CF12ANL-01 in my old car and swapped them into my sons car .....works like brand new

Psychopjv

iTrader: (16)

Not to bump but I changed every rear bulb (3157/194/921) to LED. Changed all fronts (194/3157NA) fogs (880) to LED and had to use CEC EF32RL and everything works. I do not have cruise control so I cannot talk on that point but it was literally bulbs and flasher swap and it's glorious.