depo headlights
#141
TECH Apprentice
iTrader: (5)
Join Date: Sep 2005
Location: Fort Myers, FL
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Here they are installed. I did run into some issues on the driver side after install, the adjustment screw on the top didn't work. It would just spin and not adjust the light. The passenger side was good. I am guessing the driver side was so far off because of it being broken and not adjusted correctly.
Instead of getting a replacement I just took the old bracket off the stock light (it feels a lot more solid btw) and added it to the new light. Worked like a charm.
I will get some better pictures tomorrow ... edit: slightly better, didn't feel like taking out my Canon.
Instead of getting a replacement I just took the old bracket off the stock light (it feels a lot more solid btw) and added it to the new light. Worked like a charm.
I will get some better pictures tomorrow ... edit: slightly better, didn't feel like taking out my Canon.
Last edited by titter; 02-24-2012 at 05:39 PM.
#143
TECH Apprentice
Join Date: Nov 2001
Location: Kings Park, NY
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
So I received my Depo lights today from Amazon. Gotta say, I'm a little disappointed in the finish. The black stripping that goes around the bezel "breaks" near the top outside corner of the light. Looking at the pics in this thread doesn't seem to be an issue when the hood is closed as that area is covered, but did anyone elses lights come like this? Maybe I just got a bad set, but both the left and the right have the break in the stripping.
I had installed Depo lights on my wife's 02 Monte last year (ordered from Amazon as well) and was/am happy with those. Her stockers were condensing up and were getting old/hazed. These Camaro ones don't seem to have the same finish as those did.
I had installed Depo lights on my wife's 02 Monte last year (ordered from Amazon as well) and was/am happy with those. Her stockers were condensing up and were getting old/hazed. These Camaro ones don't seem to have the same finish as those did.
#144
Launching!
iTrader: (7)
Join Date: May 2011
Location: Ohio
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
Order Summary
Items:
$130.61
Shipping & Handling:
$0.00
--------------------------------------------------------------------------------
Total Before Tax:
$130.61
Estimated Tax To Be Collected:*
$0.00
--------------------------------------------------------------------------------
Order Total: $130.61
Items:
$130.61
Shipping & Handling:
$0.00
--------------------------------------------------------------------------------
Total Before Tax:
$130.61
Estimated Tax To Be Collected:*
$0.00
--------------------------------------------------------------------------------
Order Total: $130.61
#149
TECH Resident
That's the look I want...THX!
They will look just as good on your car as mine...maybe even better
They will look just as good on your car as mine...maybe even better
#153
On The Tree
iTrader: (1)
Join Date: Oct 2009
Location: bay area, Cali
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
got mine today n just put them on ordered them friday night shipping was pretty fast for me in Cali, Had stock whistled but went to sonars now im back! wanted projecters thats why got the sonars always liked the stock headlights better.
#157
Launching!
iTrader: (7)
Join Date: May 2011
Location: Ohio
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
Only fitment problem I have is the drivers side light towards the middle is really snugged up against the bumper, that it makes a hump in the rubber that is pulling away from the headlight
#158
TECH Veteran
iTrader: (7)
Join Date: Jun 2006
Location: Bay Area California
Posts: 4,409
Likes: 0
Received 0 Likes
on
0 Posts
^^Insidethreat07- Looks like they missed a small spot on the inner part of the high beam section, although they still look good. Depo should consider painting the bottom section of the lenses, they would look much better and more complete IMO