Last seat part needed to complete my interior rebuild!
#1
Last seat part needed to complete my interior rebuild!
Sorry guy, I have posted this in the want adds section, but I figured I'd share my progress - and try my luck..
My ride, pre-makeover:
Stock Neutral interior.
The carpet had holes burned in it, and it was incredibly dirty. Like filthy - unwashable.
The stock neutral seat covers were dirty, and worn. One even had a nice burn in it too. Maybe cigarette? Who knows.
The plastic seat piece that I'm posting about was also cracked to shiz. I don't know how it was broke in the first place. I tried an epoxy repair - and it worked - until I sat in the chair. It simply broke apart in seconds. Oh well...
The shifter was sloppy, and apparently an aftermarket shifter. It needed fixing - as there was no spring to re-center it.
So, I have installed:
1.) damplifier pro sound deadner
2.) black classic industries high-pile carpet
3.) custom seat Covers (black with neutral stripes- high quality!)
4.) customy embroidered head rests
5.) mgw shifter with satin gripper ****
The *only* thing that I need is the plastic "power seat switch housing" for the drivers side. It's the plastic piece that runs along the bottom of the seat, and houses the power seat buttons. LUMBAR SEAT housing only.
I am using an ipad and can't post any pictures - but here is a link from david T's junk yard... The piece AND colour I need!
http://www.davidt.com/enlarge/1705/16390/
If anyone has one knows where to get one, I'd love to know!
(and if anyone can post that image for me, that'd be great!)
I'd also accept ebony! No gray though
My ride, pre-makeover:
Stock Neutral interior.
The carpet had holes burned in it, and it was incredibly dirty. Like filthy - unwashable.
The stock neutral seat covers were dirty, and worn. One even had a nice burn in it too. Maybe cigarette? Who knows.
The plastic seat piece that I'm posting about was also cracked to shiz. I don't know how it was broke in the first place. I tried an epoxy repair - and it worked - until I sat in the chair. It simply broke apart in seconds. Oh well...
The shifter was sloppy, and apparently an aftermarket shifter. It needed fixing - as there was no spring to re-center it.
So, I have installed:
1.) damplifier pro sound deadner
2.) black classic industries high-pile carpet
3.) custom seat Covers (black with neutral stripes- high quality!)
4.) customy embroidered head rests
5.) mgw shifter with satin gripper ****
The *only* thing that I need is the plastic "power seat switch housing" for the drivers side. It's the plastic piece that runs along the bottom of the seat, and houses the power seat buttons. LUMBAR SEAT housing only.
I am using an ipad and can't post any pictures - but here is a link from david T's junk yard... The piece AND colour I need!
http://www.davidt.com/enlarge/1705/16390/
If anyone has one knows where to get one, I'd love to know!
(and if anyone can post that image for me, that'd be great!)
I'd also accept ebony! No gray though
Last edited by Ghostintheshell; 11-14-2011 at 10:43 AM.
#2
Btw - I'll have pictures as soon as I get my internet working and I don't have to use this ipad....
The interior looks really great in my humble opinion. I'll have some work pictures too... Along the way kind of pictures.
The interior looks really great in my humble opinion. I'll have some work pictures too... Along the way kind of pictures.
#4
Did the Camaros come with lumber seats? Because it's the lumbar version I need.
I bought a new "old" replacement from the web... Turned out I spent 50 bucks shipped on a part that (a.) didn't fit and (b.) wasn't the right neutral colour.
I doubt I'm going to have much luck finding it really... It sucks because it's so visible and my current one is just hanging off, broken.
I bought a new "old" replacement from the web... Turned out I spent 50 bucks shipped on a part that (a.) didn't fit and (b.) wasn't the right neutral colour.
I doubt I'm going to have much luck finding it really... It sucks because it's so visible and my current one is just hanging off, broken.
Trending Topics
#9
Well, I've purchased the grey one for now. im going to paint it plack.
Can anyone tell me how to find the part number? That might help me find the elusive tan coloured piece !
Can anyone tell me how to find the part number? That might help me find the elusive tan coloured piece !
#10
TECH Resident
iTrader: (9)
Join Date: Feb 2007
Location: Kingsport Tn
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
It's funny cause I need a non power piece for my driver side and passenger side for the camaro seats I put in my s10. They were power seats but I installed them on the s10 rails so they are no longer power.