Presents from Santa!!!
#61
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
ya the quads do not look good at all. i should be home by at least 8 central time. it will good on your trans am. hard not to look good on a som car
. once you get it on you need to drive it and let the exhaust settle. then if anything is hitting you can fix it. the tips take a little bit of time to get em straight. on the kooks you have to take the heat shield off by the over the axle part on the gas tank. i didn't want the exhaust to be that close to the gas tank because all they send you is heat tape lol. to i cut mine up and bent it to were it needs to be. but know its hitting but i don't have my passenger side exhaust hanger by the transmission on because i threw it away. the exhaust fits great and didn't lose any ground clearance. where is minooka il by?
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#64
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
ya im by stl area. lol its a 5 1/2 ton lift lol yours wouldn't fall i strap them to the arms just incase it locks to where if the line brakes it still stays up. plus it would only fall 5 ft
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#67
TECH Apprentice
Thread Starter
iTrader: (3)
Join Date: Feb 2008
Location: Salem, Indiana
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks for all the posts and the compliments. The shifter is from eBay member zrchris. (prolly not supposed to say that) just type in trans am hurst in the eBay search.
#70
TECH Apprentice
Thread Starter
iTrader: (3)
Join Date: Feb 2008
Location: Salem, Indiana
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It has an angle to it. I don't know if I have it on correctly but there are grooves on the side of the shifter stick and grooves on shifter base so I just ligned them up and bolted it in.