Bitviper Antenna
Thread Starter
Joined: Jun 2009
Posts: 901
Likes: 572
From: Cartersville GA
Bitviper Antenna Well I received my Bitviper antenna today, being me I ran out to the car to install it and see how it looks on the car. What is a 5 minute job took about 30 minutes, someone had hulked on the old antenna and I couldn’t get it off,
so I took a pair of channel locks to hold the base. Then what do you know the antenna screw broke off in the antenna. WTF 
Uploaded with ImageShack.us
Uploaded with ImageShack.us
The antenna screw was too short then but I saw that there was another peace to the base (round thing in pic) so I unscrewed that and BAM it fits
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
All in all I think it looks great and should be on the mod list
so I took a pair of channel locks to hold the base. Then what do you know the antenna screw broke off in the antenna. WTF 
Uploaded with ImageShack.us
Uploaded with ImageShack.us
The antenna screw was too short then but I saw that there was another peace to the base (round thing in pic) so I unscrewed that and BAM it fits
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
All in all I think it looks great and should be on the mod list
Last edited by 95sscamaro; Jan 4, 2012 at 09:51 PM.
The BitViper antenna is a great piece of hardware. I still have mine from my old SS, wish I could use it on my WS6...thought of doing the automatic to manual swap for antenna, but decided against it. A nice piece though, worth the cash. Don't need mine...
Why cant you put it on your ws6? You can pull out the automatic antenna and put it in...
Formally Simplɘ Jack
Joined: Mar 2011
Posts: 1,452
Likes: 2
From: Chicago
I might just get one of those this time, I've been through two antennas: I bought a 8" one on ebay that looked like stock but the mast fell fall while driving, I sawed off my original antenna to 8" and glued the ball on top but the ball recently just fell off while driving 
so might just take the plunge with the BitViper, I just don't like that it's fat lol.
so might just take the plunge with the BitViper, I just don't like that it's fat lol. Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
Joined: Jun 2009
Posts: 901
Likes: 572
From: Cartersville GA
This is an email I got from Bitviper, I am just sharing it.
Here's my information...........
I'm charging $25 for a complete set up shipped any where in the USA.
The antenna is all rubber so the elements don't bother it. It also has a loaded base so you wont notice any change in reception...
This antenna is specific to only those cars that have non-electric antennas...you know the big GM whip types.
Installation is really easy...you just unscrew your stocker, screw in mine...thats it!
I can take PayPal at Pittsa@san.rr.com ... or you can send me a check or money order if you don't mind waiting until it clears.
Don't forget your mailing address (and If your using PayPal make sure your account mailing address is correct) and screen name, and site so I can tie our PM's to your order.
Thanks,
Aaron "BitViper" Pitts
Some shots of cars that have been "Bitten"
Here's my information...........
I'm charging $25 for a complete set up shipped any where in the USA.
The antenna is all rubber so the elements don't bother it. It also has a loaded base so you wont notice any change in reception...
This antenna is specific to only those cars that have non-electric antennas...you know the big GM whip types.
Installation is really easy...you just unscrew your stocker, screw in mine...thats it!
I can take PayPal at Pittsa@san.rr.com ... or you can send me a check or money order if you don't mind waiting until it clears.
Don't forget your mailing address (and If your using PayPal make sure your account mailing address is correct) and screen name, and site so I can tie our PM's to your order.
Thanks,
Aaron "BitViper" Pitts
Some shots of cars that have been "Bitten"
Last edited by 95sscamaro; Feb 4, 2012 at 10:40 AM.
Formally Simplɘ Jack
Joined: Mar 2011
Posts: 1,452
Likes: 2
From: Chicago
I might cop this 3" carbon fiber one, what ya'll think..........
http://www.ebay.com/itm/3-INCH-REAL-...item20bd286246
http://www.ebay.com/itm/3-INCH-REAL-...item20bd286246
just get this one and call it a day, i bet those carbon ones dont last
http://www.ebay.com/itm/Camaro-Z28-S...item2314f4b755
http://www.ebay.com/itm/Camaro-Z28-S...item2314f4b755
Formally Simplɘ Jack
Joined: Mar 2011
Posts: 1,452
Likes: 2
From: Chicago
I used to have this cheap *** one that didn't last...........
http://www.ebay.com/itm/8-Black-Shor...item35b83be6b4
http://www.ebay.com/itm/8-Black-Shor...item35b83be6b4
Formally Simplɘ Jack
Joined: Mar 2011
Posts: 1,452
Likes: 2
From: Chicago
BitViper isn't a brand. He's a guy who makes them on this site. Just send him a PM. I can guarantee you it isn't a POS and you'll be very satisfied with it. If a bigger company was making it it'd probably be $50.
Nope. The ones on eBay are those cheap Chinese things...which isn't to say I don't like cheap Chinese things, but I and LOTS of others know from experience BitViper's antenna is great and you'll be supporting a forum member at the same time.
Formally Simplɘ Jack
Joined: Mar 2011
Posts: 1,452
Likes: 2
From: Chicago
That one you linked looks like garbage lol. So I would need to get in touch with BitViper and he'll send me one or does he have to make from scratch? Sorry for the noob question, I just thought BitViper was a brand cause everyone mentioned them lol.
He does make them from scratch (essentially, assuming he has a mold or whatever) so he makes them per order I believe. Just send him a PM and he'll let you know (basically just PP him the cash and you'll get it relatively quickly).