The Professor

iTrader: (3)

Hey guys, i'm about to install clear corners and i got the LED 3157's, 194's, and two EL12 flashers. I connected everything but now when i use the turn signal or hazards my DRL's (3157's) blink instead of my 194's. And my 194's don't work at all. Any ideas?

SSactionLs1

First check your fuses

The Professor

iTrader: (3)

the fuses are fine

Xsta Z 28

iTrader: (2)

Sometimes you need uplug the buld and rotate it 180* in the socket to work . . . Just a thought.

2002SS339

I only needed one el12 flashers, where's the other go to? I got the same setup

Xsta Z 28

iTrader: (2)

One for the turn signals and one for the hazzards . . . .

The Professor

iTrader: (3)

yeah, i finally got the 194's to work but they still don't blink. when i signal, my 3157's blink and my 194's just stay lighted. i guess i'll just live with it. thanks anyways.

VIP1

Which ones are the 194s? Are they the ones on the side of the car? If so, I dont think they blink even in stock configuration. Can anyone confiorm this?

--VIP1

Xsta Z 28

iTrader: (2)

They are the little bulbs that point to the side. I know the rear ones do not blink, I cannot recall for the life of me if the front ones do, or not.

joedrum71

I do believe the 194's do not blink. Just a side marker. The front, too.

VIP1

I just checked on my car (a 2001 Formula). The side markers don't blink with either the signals or hazards. Only the DRLs and the taillights blink.

--VIP1

The Professor

iTrader: (3)

LOL....thanks guys, i just ASSumed it was the sidemarkers that were blinking. 'preciate it!