C6 ZO6 brake conversion and CCW's **PICS**
#22
Launching!
Thread Starter
iTrader: (3)
Join Date: Jan 2008
Location: Ringgold, Georgia
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
I drilled out the holes on my factory bracket to the bigger 14mm zo6 bolts. I cut my dust shield to make room for the caliper. Once I got everything bolted up the caliper was not center on the rotor. So I took it to a machine shop and had .020 taken off the caliper to bring it in. That got it center on the rotor.
#36
Staging Lane
Join Date: Oct 2005
Location: Ashburn, Virginia
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
I know this is sort of an old thread but I second this question. I see you explained how you modified the caliper and bracket, but I'm curious on how you were able use the factory e-brake system on our cars using the C6 Z06 rotors. It doesn't look like the center hub diameter is big enough on the Z06 rotor to accept the pads from the factory e-brake system.
#38
Staging Lane
Join Date: Oct 2005
Location: Ashburn, Virginia
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the information!! This helps me out a lot. I'll be sticking with a CTS-V1 setup for the rears since my fronts are already done up in V1 form. It appears I'll have to do the same shoe mod you did to get them to fit. I won't know about the rear caliper and rotor clearance until I get the parts in and do some mock-up. Probably won't touch it until late winter though.
#39
Launching!
Thread Starter
iTrader: (3)
Join Date: Jan 2008
Location: Ringgold, Georgia
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the information!! This helps me out a lot. I'll be sticking with a CTS-V1 setup for the rears since my fronts are already done up in V1 form. It appears I'll have to do the same shoe mod you did to get them to fit. I won't know about the rear caliper and rotor clearance until I get the parts in and do some mock-up. Probably won't touch it until late winter though.
#40
TECH Fanatic
iTrader: (10)
If only you didnt have to run obscenely large wheels with this setup...
traction vs. stopping power; can never have best of both worlds...
It makes me ponder the question as to exactly how much of a difference the bigger brakes and rotors would make compared to a decent stock setup (blank brembos/hawk pads) seeing as you have to run a large tire with little sidewall that kills traction. Im sure the c6 setup would still win for sure but I wonder by how much and if it is worth it. Having to spend over $2k (before the CCWs to boot) when for a little more you can run an aftermarket brembo or stoptech kit and get the same effect while being able to keep and run smaller wheels with a lot more meat and traction.
With that said, Thanks for sharing pics and info tho OP
traction vs. stopping power; can never have best of both worlds...
It makes me ponder the question as to exactly how much of a difference the bigger brakes and rotors would make compared to a decent stock setup (blank brembos/hawk pads) seeing as you have to run a large tire with little sidewall that kills traction. Im sure the c6 setup would still win for sure but I wonder by how much and if it is worth it. Having to spend over $2k (before the CCWs to boot) when for a little more you can run an aftermarket brembo or stoptech kit and get the same effect while being able to keep and run smaller wheels with a lot more meat and traction.
With that said, Thanks for sharing pics and info tho OP