Installed decals for front of car
#1
Launching!
Thread Starter
iTrader: (7)
Join Date: Nov 2003
Location: 3 miles south of Tel Aviv
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
Installed decals for front of car
After I installed decals for rear of car I did the front of the car. The outcome is good but not as impressive.
First I changed the "ram air" from dark charcoal to black on both sides of the hood. I used masking tape to mark the originals before removing them so the new decals would come out in the same locations. Before:
After:
Before:
After:
Second I added decals to the "PONTIAC" raised letters on the driver's side headlight door. These didn't come out as good as I had hoped because they are curved but from a distance they look okay. Check out the "O"!
Before:
After:
All done!
Next I'll do the "Trans Am" letters on the doors and then the wheels.
First I changed the "ram air" from dark charcoal to black on both sides of the hood. I used masking tape to mark the originals before removing them so the new decals would come out in the same locations. Before:
After:
Before:
After:
Second I added decals to the "PONTIAC" raised letters on the driver's side headlight door. These didn't come out as good as I had hoped because they are curved but from a distance they look okay. Check out the "O"!
Before:
After:
All done!
Next I'll do the "Trans Am" letters on the doors and then the wheels.
Last edited by David 2002 WS6; 04-19-2004 at 12:05 PM.